Forum

Author Topic: Camera type configuration  (Read 3159 times)

Yoann Courtois

  • Sr. Member
  • ****
  • Posts: 316
  • Engineer in Geodesy, Cartography and Surveying
    • View Profile
Camera type configuration
« on: September 14, 2017, 12:58:31 PM »
Hi !

Since a while I'm notice a problem in the Camera Calibration panel:

Indeed, when working with more than one camera in a single project, and especially when they are different in type (Frame, Fisheye), the type of a camera is sometimes changing when looking at the second camera.

Example:
A project with a fisheye (GoPro) and a frame (EOS 5D) camera:
- The GoPro is configured as fisheye lens and precalibrated.
- But when I clic on the second camera, the GoPro type change to "frame"...
- If I'm not taking care about that, it lost the precalibration and also use a frame calibration type for it...

May you fix this ?

Regards
--
Yoann COURTOIS
R&D Engineer in photogrammetric process and mobile application
Lyon, FRANCE
--

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Camera type configuration
« Reply #1 on: September 14, 2017, 01:33:42 PM »
Hello Yoann,

Thank you for reporting. We'll check that and fix in the next 1.3 update.
Best regards,
Alexey Pasumansky,
Agisoft LLC

Alexey Pasumansky

  • Agisoft Technical Support
  • Hero Member
  • *****
  • Posts: 14813
    • View Profile
Re: Camera type configuration
« Reply #2 on: September 19, 2017, 08:36:24 PM »
Hello Yoann,

You can check version 1.3.4 already:
http://www.agisoft.com/downloads/installer/
Best regards,
Alexey Pasumansky,
Agisoft LLC

Yoann Courtois

  • Sr. Member
  • ****
  • Posts: 316
  • Engineer in Geodesy, Cartography and Surveying
    • View Profile
Re: Camera type configuration
« Reply #3 on: September 25, 2017, 10:09:48 AM »
Hi Alexey !

Bug fixed, well done !
Thank you
--
Yoann COURTOIS
R&D Engineer in photogrammetric process and mobile application
Lyon, FRANCE
--