Forum

Author Topic: Can't open file: The system cannot find the file specified (Cannot read Points)  (Read 2693 times)

rexsham

  • Newbie
  • *
  • Posts: 31
    • View Profile
1. I used network mode to process project. The Project has 1000 images with GPS tag. Using latest V1.4.4. 6848
2. The first alignment worked OK, both worker machines can read images from the network drive and process accordingly.
3. But I am not satisfied with the results.
4. Then I do this:
i. RIght click on  "Tie Points" at the Workspace pane.
ii. Click "Delete Tie Points"
5. Restart the Align Photos process by clicking Align Photos.


Then I see this:

2018-10-01 18:29:57 [192.168.1.124:54740] finished #9 MatchPhotos
2018-10-01 18:29:59 [192.168.1.124:54740] finished #9 MatchPhotos.initialize (1/1)
2018-10-01 18:30:00 [192.168.1.145:63411] failed #9 MatchPhotos.detect (2/62): Can't open file: The system cannot find the file specified (2): //192.168.1.177/fastraid/3rdTryTIF.files/0/0/point_cloud/points.grp
2018-10-01 18:30:01 [192.168.1.145:63411] failed #9 MatchPhotos.detect (3/62): Can't open file: The system cannot find the file specified (2): //192.168.1.177/fastraid/3rdTryTIF.files/0/0/point_cloud/points.grp
2018-10-01 18:30:02 [192.168.1.145:63411] failed #9 MatchPhotos.detect (4/62): Can't open file: The system cannot find the file specified (2): //192.168.1.177/fastraid/3rdTryTIF.files/0/0/point_cloud/points.grp
2018-10-01 18:30:02 [192.168.1.145:63411] failed #9 MatchPhotos.detect (5/62): Can't open file: The system cannot find the file specified (2): //192.168.1.177/fastraid/3rdTryTIF.files/0/0/point_cloud/points.grp
2018-10-01 18:30:22 [192.168.1.145:63411] finished #9 MatchPhotos.detect (6/62)
2018-10-01 18:30:27 [192.168.1.124:54740] finished #9 MatchPhotos.detect (1/62)

If I continue the process till the end, it will yield a Sparse Cloud with 9 tie points only.

If I also delete the Key Points, results are exactly the same.

The only way I can use Network mode again to get through Align Photo is to recreate a new project.

I can use standalone mode to do Align Photo if this error pop out, but it will still yield a Sparse Cloud with 9 tie points only.

So there will be no way to recover this project after this error.
 



« Last Edit: October 01, 2018, 02:08:44 PM by rexsham »