Agisoft Metashape

Agisoft Metashape => General => Topic started by: matteosin on January 14, 2019, 11:06:06 AM

Title: Moving the whole region
Post by: matteosin on January 14, 2019, 11:06:06 AM

Hi all,

I need to move the whole survey of a fixed quantity: Easting =+ 1.909m  Northing =+5.567m  levels = +0.613m

Any help on how perform this in Agisoft?I was checking "move region" but seems like I can't input any precise parameter.

Thank you

Title: Re: Moving the whole region
Post by: Alexey Pasumansky on January 14, 2019, 11:20:26 AM

Hello matteosin,

Do you need to move the reconstruction volume, translate the whole model by fixed offset or have the exported result translated?

For the latter case you can use Shift option in the export dialog. The values input to the Shift fields will be subtracted from the point cloud/mesh export.

Title: Re: Moving the whole region
Post by: matteosin on January 14, 2019, 11:35:24 AM

Hi Alexey,

I basically need to export Dem and Orthomosaic traslate by fixed offset.

In the export option for Dem and Orthomosaic I do not see this option of shifting (I saw this option only in the export dialog of Dense Point Cloud)

Thank you

Title: Re: Moving the whole region
Post by: matteosin on January 14, 2019, 12:05:12 PM

I found the shift dialog also for Orthomosaic and Dem but it's lock. I cannot tipe in the field X -Y - Z. See attached image

Title: Re: Moving the whole region
Post by: matteosin on January 14, 2019, 03:24:02 PM

I have also tried to export the Dense Cloud.

In the export dialog I input the fixed offset I need (filling up the field Shift X-Y-Z), and then I tried to import it again in the same file but seems like he did not do anything.

Everything is in the same location (I have checked exporting the orthomosaic generated from the shifted Dense Cloud).

Help please

Title: Re: Moving the whole region
Post by: bendead on June 18, 2020, 04:19:50 PM

Hi,

I am also very interested about his.

I am using a PPK system, using average base position so the all model is precise but shifted. But I also have the precise coordinates of ground features along the way, so I just want to shit a big region with one coordiante or using the X-Y shift in meters

Benjamin

Title: Re: Moving the whole region
Post by: kimberleysurveying on November 16, 2022, 04:57:00 AM

Did anyone work this out?

Title: Re: Moving the whole region
Post by: jetdog6 on August 11, 2023, 06:01:15 PM

+1 on this.  I'm tired of having to systemically shift all my photos by a few tenths, this should just be a simple shift in agisoft.