Agisoft Metashape

Agisoft Metashape => Camera Calibration => Topic started by: hadiyana on May 17, 2019, 09:30:53 AM

Title: Load Camera Calibration Error - Image Size Missmatch
Post by: hadiyana on May 17, 2019, 09:30:53 AM
Hi Alexey..

I did drone survey using pre calibrated camera. The problem was, image size my camera captured is different with image size in camera calibration file. So when I load camera calibration file error occured. It said "image size missmatch". How can I resolve this?

Is there anyway to change/convert camera calibration parameters for different image resolutions.


Thanks.
Asep Hadiyana
Title: Re: Load Camera Calibration Error - Image Size Missmatch
Post by: Alexey Pasumansky on May 17, 2019, 02:03:46 PM
Hello Asep,

What are the image dimensions for the photos loaded to Metashape (according to the Camera Calibration dialog) and the parameters in the file that you are trying to import?
Title: Re: Load Camera Calibration Error - Image Size Missmatch
Post by: hadiyana on May 18, 2019, 01:48:29 AM
Hi Alexey,

The Image dimensions for the photos loaded to metashape are 4864 x 3648 pix. Image dimension in camera calibration parameter file are 5472 x 3648 pix.


Thanks.
Asep Hadiyana
Title: Re: Load Camera Calibration Error - Image Size Missmatch
Post by: hadiyana on May 20, 2019, 12:54:32 PM
Hi Alexey,
Is there any idea regarding this problem?

Asep Hadiyana
Title: Re: Load Camera Calibration Error - Image Size Missmatch
Post by: Alexey Pasumansky on May 20, 2019, 01:51:25 PM
Hello Asep,

The calibration seems to be performed for other camera or image format and it is not applicable to the images with the other dimensions.