Agisoft Metashape

Agisoft Metashape => General => Topic started by: kiteman on January 28, 2020, 01:51:39 PM

Title: Why this?
Post by: kiteman on January 28, 2020, 01:51:39 PM

Hi,
I have to create orthophotos from a series of cores.
the cores are inside a box shaped like a 1 meter long parellelepiped.
the point cloud of the box and the cardboard appears deformed by a curvature. why does this happen?
overlap of about 75%.



devo creare ortofoto di una serie di carotaggi.
i carotaggi sono all'interno di una scatola a forma di parellelepipedo di 1 metro di lunghezza.
la nuvola di punti della scatola e del cartaggio appaiono deformate da una curvatura. perchè accade questo?
sovrapposizione di circa il 75%.

Title: Re: Why this?
Post by: Alexey Pasumansky on January 28, 2020, 02:30:09 PM

Hello kiteman,

Which camera you are using? Can you also provide the screenshots from Initial and Adjusted values tab of Camera Calibration dialog?

Title: Re: Why this?
Post by: kiteman on January 28, 2020, 04:15:20 PM

Here initial screen

Title: Re: Why this?
Post by: kiteman on January 28, 2020, 04:15:58 PM

adjusted screen