Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: wojtek on May 20, 2020, 02:54:07 PM

Title: "Analyzing mesh..." takes very long
Post by: wojtek on May 20, 2020, 02:54:07 PM

Hey,

It seems that this takes a bit longer than it used to/should. I haven't tested extensively in prior versions yet but I don't remember things taking this long before.

When it gets stuck like that it eventually completes but it might be taking hours (i haven't clocked it exactly)

I'm currently on latest 1.6.3 pre release build.

I've sent a test project to you via email to support@agisoft.com. To reproduce please decimate the provided model down to 50 000 000 or 40 000 000 and then try to do a gradual selection on it (Model before decimation shouldn't get stuck on the Analyzing step. I kept the original though so you can see what's going on)

Title: Re: "Analyzing mesh..." takes very long
Post by: wojtek on June 08, 2020, 02:48:21 PM

This is still an issue with the 1.6.3 official release version.

Title: Re: "Analyzing mesh..." takes very long
Post by: wojtek on August 31, 2020, 03:28:25 PM

Also an issue in 1.6.4

Title: Re: "Analyzing mesh..." takes very long
Post by: Alexey Pasumansky on September 19, 2020, 01:24:04 PM

The issue should be fixed in the version 1.6.5 update to be released very soon.

Title: Re: "Analyzing mesh..." takes very long
Post by: Alexey Pasumansky on September 24, 2020, 03:13:27 PM

Hello wojtek,

You can check the pre-release version of 1.6.5 (build 11175) available by the links below:

Quote

http://download.agisoft.com/metashape-pro_1_6_5_x64.msi
http://download.agisoft.com/metashape-pro_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape-pro_1_6_5.dmg

http://download.agisoft.com/metashape_1_6_5_x64.msi
http://download.agisoft.com/metashape_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape_1_6_5.dmg

The problem with the long time for the mesh analysis should be fixed now.

Title: Re: "Analyzing mesh..." takes very long
Post by: wojtek on September 27, 2020, 02:12:42 PM

Quote from: Alexey Pasumansky on September 24, 2020, 03:13:27 PM

Hello wojtek,

You can check the pre-release version of 1.6.5 (build 11175) available by the links below:

Quote

http://download.agisoft.com/metashape-pro_1_6_5_x64.msi
http://download.agisoft.com/metashape-pro_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape-pro_1_6_5.dmg

http://download.agisoft.com/metashape_1_6_5_x64.msi
http://download.agisoft.com/metashape_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape_1_6_5.dmg

The problem with the long time for the mesh analysis should be fixed now.

Hello Alexey,

I've tested this on a few of the problematic projects and it does work properly now. Thanks for getting this fixed!


Regards