Agisoft Metashape

Agisoft Metashape => General => Topic started by: roby on June 08, 2020, 01:19:45 PM

Title: stitching
Post by: roby on June 08, 2020, 01:19:45 PM
Hi, If the overlap of the images is about 15%, what software is recommended for stitching. While it can use GNSS information about images
Title: Re: stitching
Post by: rossnixon on June 08, 2020, 02:01:00 PM
I have used this free software. https://www.microsoft.com/en-us/research/product/computational-photography-applications/image-composite-editor/
It does not use any EXIF or GPS related data, so you won't get an orthographically correct image.
Title: Re: stitching
Post by: roby on June 08, 2020, 02:54:01 PM
I have used this free software. https://www.microsoft.com/en-us/research/product/computational-photography-applications/image-composite-editor/
It does not use any EXIF or GPS related data, so you won't get an orthographically correct image.

Thank you for your answer. But I worked with image composite editor software. None of the softwares that does stitching photo  don’t  receive ground control points and Exif information. I'm looking for a solution to deal with low overlap image.