Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: ferengi on July 24, 2020, 02:43:58 PM

Title: reduce overlap -> empty bbox
Post by: ferengi on July 24, 2020, 02:43:58 PM

hi,

i'm trying reduce overlap for the first time and get an error: bboxLength: empty bbox
Metashape Version 1.6.3 Build 10732

Title: Re: reduce overlap -> empty bbox
Post by: ferengi on July 24, 2020, 02:56:39 PM

found a solution.
if i decimate the model it works

Title: Re: reduce overlap -> empty bbox
Post by: Seboon on July 28, 2020, 09:51:29 PM

Hello,

I meet the same issue, and decimation mesh doesn't change nothing for me.

Title: Re: reduce overlap -> empty bbox
Post by: ncswayze on August 05, 2020, 07:41:55 PM

I have also been having this issue as well, sometimes it seems to work fine, other times it will not work at all. It doesn't matter what the settings I select are, same problem.

Version 1.6.3 build 10732.

Title: Re: reduce overlap -> empty bbox
Post by: Alexey Pasumansky on August 08, 2020, 04:01:27 PM

If you are observing the problem, please send the related project (with the camera alignment and mesh model) to support@agisoft.com as a download link.

Title: Re: reduce overlap -> empty bbox
Post by: cbnewham on September 19, 2020, 11:12:01 PM

I'm getting this too.

There appears to be no solution. Decimating the mesh does not work. Creating a new chunk and building a new low-res model does not work.

Help.

Title: Re: reduce overlap -> empty bbox
Post by: Hamish on September 21, 2020, 09:57:17 AM

I had this problem earlier this year (when I first tried to use reduce overlap), amongst other issues.

I was using:
AMD FX-8350, 32GB ram, SSD
2x Nvidia GTX760 4GB (with driver version 388.71)
Windows 8.1 Pro

The graphics cards are right old now, I downloaded driver 388.71 in January 2018, that was the last driver version that cuda worked on for these cards. when cuda doesn't work metashape either can't see the cards properly or throws up errors all the time. That driver only had cuda support to v9.0

In April 2020 I upgraded to 1x Nvidia RTX2060 6GB (latest drivers) & reluctantly to Windows 10 Pro and not had the problem since with reduce overlap -> empty bbox.
I'm normally using the latest stable version of Metashape (not preview releases) Standard.

Title: Re: reduce overlap -> empty bbox
Post by: Alexey Pasumansky on September 21, 2020, 12:02:59 PM

The problem with "empy bbox" error related to the Reduce Overlap command should be fixed in the upcoming 1.6.5 version update.

Title: Re: reduce overlap -> empty bbox
Post by: Seboon on September 21, 2020, 03:46:17 PM

Thanks for that Alexey!

Could you give us an idea of the release date of 1.6.5?

Best regards,
Sébastien

Title: Re: reduce overlap -> empty bbox
Post by: Alexey Pasumansky on September 21, 2020, 03:54:52 PM

Hello Sébastien,

It is about to be released, just final testing is performed, you can find the links to the pre-release version of 1.6.5 (build 11175) below:

Quote

http://download.agisoft.com/metashape-pro_1_6_5_x64.msi
http://download.agisoft.com/metashape-pro_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape-pro_1_6_5.dmg

http://download.agisoft.com/metashape_1_6_5_x64.msi
http://download.agisoft.com/metashape_1_6_5_amd64.tar.gz
http://download.agisoft.com/metashape_1_6_5.dmg

If you install it, please let me know, if the problem is resolved in this version.

Title: Re: reduce overlap -> empty bbox
Post by: Seboon on September 21, 2020, 04:00:11 PM

Thank you so much Alexey!

I'll give it a try!

Best regards,
Sébastien

Title: Re: reduce overlap -> empty bbox
Post by: Seboon on September 21, 2020, 05:39:15 PM

Quote from: Alexey Pasumansky on September 21, 2020, 03:54:52 PM

If you install it, please let me know, if the problem is resolved in this version.

Works like a charm, perfect!!!

Best regards,
Sébastien