Agisoft Metashape
Agisoft Metashape => General => Topic started by: m76 on December 21, 2020, 05:59:04 PM
-
I'm trying to import images from a ladybug5 camera as a multi sensor device, and I need to mask part of the images as the vehicle carrying the camare is visible on them. So I'd need to appyl the exact same mask to all images. But I see no such option in metashape.
-
Hello m76,
Please check, if the solution from the similar thread works for you:
https://www.agisoft.com/forum/index.php?topic=1719.msg9007#msg9007
If you have drawn the mask in Metashape for single camera, you should export it to the png file and then import back using the fixed file name for all the cameras.
-
Hello m76,
Please check, if the solution from the similar thread works for you:
https://www.agisoft.com/forum/index.php?topic=1719.msg9007#msg9007
If you have drawn the mask in Metashape for single camera, you should export it to the png file and then import back using the fixed file name for all the cameras.
Thanks, but that does not work for me. As this is a multi sensor device I have 6 masks for each camera location.
-
Alexey,
What if you could give a try when you are done export it as a orthomosaic or a model at the end and then save it as png and maybe use some other software such as Photoshop or some other software such as XnView or Inkscape and clean it up there and then bring it back into Metashape and use it as a mask there ?
Would that work ?
-
Hello m76,
So do you want to import individual mask for each sensor in the multicamera system? And not just the same mask for all the images at once.
-
Hello m76,
So do you want to import individual mask for each sensor in the multicamera system? And not just the same mask for all the images at once.
Yes, that's exactly what I wish to do. I want to import the same 6 masks for all individual camera locations.
-
I managed to do it, by importing all the images separately grouped by sensor, and then apply masks group by group.