Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: twistedpancreas on January 12, 2021, 02:28:51 AM

Title: Align chunks issues 1.70
Post by: twistedpancreas on January 12, 2021, 02:28:51 AM

Anybody else having issues with aligning chunks?

After using these settings:

(https://i.imgur.com/Qzkxoj3.jpg)

I'm finding the chunks are way apart from each other and only one chunk will appear if I click the "Show Aligned Chunks" button (unless I move one of the chunks, as I have done in the above screenshot).

Title: Re: Align chunks issues 1.70
Post by: Alexey Pasumansky on January 13, 2021, 08:09:19 PM

Hello twistedpancreas,

The issue can be related to insufficient overlap between the images from two chunks.

But if you have masks applied to all the images in both chunks, you can try to align photos for all the images at once in the single chunk.

Title: Re: Align chunks issues 1.70
Post by: twistedpancreas on January 14, 2021, 02:04:01 AM

Ok thanks Alexey,

maybe there wasn't enough overlap with the sides of the hand model here, I'll see how we go with other models, but I've been doing similar models for about the last year and a half and the last few models haven't been aligning very well compared to the others I have done over that time.

Thanks.

Title: Re: Align chunks issues 1.70
Post by: twistedpancreas on February 09, 2021, 06:06:24 AM

Yeah sorry Alexey,

I've done a few models now and none are aligning (not even close) and they have enough overlap :(