Agisoft Metashape

Agisoft Metashape => General => Topic started by: dronesurveyconsultancy on April 13, 2021, 08:10:59 PM

Title: Problem alignment
Post by: dronesurveyconsultancy on April 13, 2021, 08:10:59 PM
Hello,

I have mapped a site over 2 days period, after alignment i get 2 clouds offseted from each other
See attached image, anyone got an idea?

BR

Title: Re: Problem alignment
Post by: Alexey Pasumansky on April 13, 2021, 10:17:49 PM
Hello dronesurveyconsultancy,

Do the altitude values for the cameras from different chunk correspond to the height above same ellipsoid or same geoid?

When you look at the camera locations right after loading images to the project, do they form one or two considerably offset levels?
Title: Re: Problem alignment
Post by: dronesurveyconsultancy on April 13, 2021, 10:20:20 PM
Hello Alex,

There is a big difference between the altitude, this because of the difference days of mapping.

2 offset levels
Title: Re: Problem alignment
Post by: Alexey Pasumansky on April 14, 2021, 12:06:48 AM
Hello dronesurveyconsultancy,

If the images were taken from more or less similar real altitude level, you may need to fix the offsets (using script, for example). Otherwise, I would suggest to uncheck all cameras in the Reference pane and perform the Align Photos operation using Generic preselection only (without Reference).