Agisoft Metashape

Agisoft Metashape => General => Topic started by: BitSaginaw on April 21, 2021, 10:28:06 PM

Title: Point Dense Cloud "Zero resolution" error
Post by: BitSaginaw on April 21, 2021, 10:28:06 PM

Hello all,

I'm still learning this software and have come across this error when trying to build a Dense Cloud. I've read about this error and have attempted to change some settings (resetting region, disabling all but one camera), but still no results.

I'll be attaching my parameters for aligning the photos as well as the log after trying to run Dense Cloud tool.

Please advise.

Title: Re: Point Dense Cloud "Zero resolution" error
Post by: Alexey Pasumansky on April 21, 2021, 10:46:51 PM

Hello BitSaginaw,

If possible, please provide the screenshot of the tie point cloud with the estimated camera location from Metashape Model view.

Also please check, if you see any adequate depth maps preview images in the Photos Pane with "show depth maps" button pressed - you should see some RGB pictures.

Title: Re: Point Dense Cloud "Zero resolution" error
Post by: BitSaginaw on April 25, 2021, 02:04:57 AM

Alexey,

Sorry I don’t understand where to find this info. Can you provide a screenshot?