Agisoft Metashape

Agisoft Metashape => General => Topic started by: jmgc on July 22, 2021, 03:27:49 PM

Title: Micasense RP06 Panel - Wrong mask detection
Post by: jmgc on July 22, 2021, 03:27:49 PM

Hi,

I'm using a Micasense calibration panel - version RP06 - but Metashape can't detect it correctly.
I need to mask the calibration area manually for every band.

Anyone with this kind of problem?
Metashape update is needed or I'm missing something?

Thanks.

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: Alexey Pasumansky on July 22, 2021, 03:43:19 PM

Hello José,

Please check, if in 1.7.4 pre-release new MicaSense panel is properly detected now:

http://download.agisoft.com/metashape-pro_1_7_4_x64.msi
http://download.agisoft.com/metashape-pro_1_7_4.dmg
http://download.agisoft.com/metashape-pro_1_7_4_amd64.tar.gz

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: jmgc on July 29, 2021, 01:33:00 PM

Hi Alexey,

Thanks for your reply, i'll try it asap.

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: jmgc on July 29, 2021, 02:34:06 PM

RP06 panels are detected and masked correctly with this 1.7.4 version.

Nice work.

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: jmgc on August 02, 2021, 09:15:36 PM

Hi Alexey,

Please note that the panel detection and masking is not perfect as when we use the older RP05 or RP04 versions.
This might need a fine tune to avoid non calibration pixels to be inside the mask.

Regards.

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: Alexey Pasumansky on August 02, 2021, 09:32:34 PM

Hello José,

Please send the examples of problematic images with the panel to support@agisoft.com.

Title: Re: Micasense RP06 Panel - Wrong mask detection
Post by: jmgc on August 19, 2021, 06:23:48 PM

Sorry the delay, here they are.

https://we.tl/t-rMhj90udba

I'm sending you a large number of panels, while the ones on folder 05 seems to be the problematic ones.