Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: Aerial Drone System on March 17, 2022, 04:00:06 PM

Title: Metashape won't select every points/faces of my point cloud/mesh
Post by: Aerial Drone System on March 17, 2022, 04:00:06 PM

Hi.

I encountered a pretty frustrating problem in Metashape that I hope will be fixed soon.
I'm using the Metashape 1.8.2 build 14217.

As you can see on these three images, when I do a selection (by the way, please integrate a polygonal selection tool next time, would be really appreciated) on my point cloud, as intended, every points look to be selected.
But when I press "Delete", some of these points are still here. And the same problem occurs with meshes.

(https://i.ibb.co/nRsTRLP/Sans-titre-1.jpg)
(https://i.ibb.co/C9f4ysr/Sans-titre-2.jpg)
(https://i.ibb.co/8Pm8YBJ/Sans-titre-3.jpg)

Could you please fix this?

Thanks in advance.

Best Regards
Mathieu Laveissiere

Title: Re: Metashape won't select every points/faces of my point cloud/mesh
Post by: Alexey Pasumansky on March 17, 2022, 04:30:06 PM

Hello Mathieu,

Does the behavior changes, if you disable (uncheck) Visible Selection option in the selection tool drop-down list before selecting the points to be removed?

Title: Re: Metashape won't select every points/faces of my point cloud/mesh
Post by: Aerial Drone System on March 17, 2022, 04:32:47 PM

Oh I feel dumb... didn't know about that option, thanks a lot!

So, would you consider adding the polygonal selection?