Agisoft Metashape

Agisoft Metashape => Feature Requests => Topic started by: ferengi on April 14, 2022, 01:55:36 PM

Title: AprilTag
Post by: ferengi on April 14, 2022, 01:55:36 PM

hi,

would be nice if metashape support AprilTags

https://github.com/AprilRobotics/apriltag

Title: Re: AprilTag
Post by: Lazar Obradovic on April 19, 2022, 01:15:33 PM

+1

Title: Re: AprilTag
Post by: Hugh on April 23, 2022, 07:54:53 PM

+1

Title: Re: AprilTag
Post by: forumname on May 20, 2022, 03:51:09 PM

Bumping this request as probably one of the most important feature updates. ChArUco would be welcome as well.

Title: Re: AprilTag
Post by: hopkuh on September 09, 2022, 10:19:02 PM

+1

Title: Re: AprilTag
Post by: Kjellis85 on November 10, 2022, 10:33:18 AM

+1

Title: Re: AprilTag
Post by: ilia on November 21, 2022, 02:59:19 PM

+1 for sure

Title: Re: AprilTag
Post by: ilia on November 22, 2022, 06:44:38 PM

But wait. As far as I know Metashape supports ArUco markers. And some of them are compatible with some AprilTags families.
Would be nice if Metashape will support calibration through AplirGrids which is more suitable for calibration and you don't need to fit the whole grid into image.

Title: Re: AprilTag
Post by: 3create on November 25, 2022, 09:33:21 AM

+1 | would be really useful!

Title: Re: AprilTag
Post by: Wizyza on April 10, 2024, 07:07:34 PM

I know I'm resurrecting a old thread.

But, l also would like to see AprilTag support implemented in Metashape.