Agisoft Metashape
Agisoft Metashape => Camera Calibration => Topic started by: arafat on July 21, 2022, 10:28:53 PM
-
Metashape 1.8.4 allows regularized and full compensation.
I understand the difference between them, but I do not know how to choose between them,
1- Is Full always better than regularized ?
2- Is there a way (manually/automatically) to detect the need for compensation in images?
-
Any news regarding this?
-
Any news regarding this?
https://www.agisoft.com/forum/index.php?topic=14671.msg64383#msg64383
Regularized model is suitable for the case when the drone flies without turning the camera, i.e. during the shooting to a new route, the camera does not turn and the drone moves in parallel.
When using a Regularized, only two parameters are optimized for each frame: axis shift XY in the plane of the photo. When using the Full model, 6 parameters are optimized for each frame: shift along the XYZ axes and rotation along the XYZ axes.
-
Any news regarding this?
https://www.agisoft.com/forum/index.php?topic=14671.msg64383#msg64383
Regularized model is suitable for the case when the drone flies without turning the camera, i.e. during the shooting to a new route, the camera does not turn and the drone moves in parallel.
When using a Regularized, only two parameters are optimized for each frame: axis shift XY in the plane of the photo. When using the Full model, 6 parameters are optimized for each frame: shift along the XYZ axes and rotation along the XYZ axes.
Thank you for the explanation. Perfect!