Agisoft Metashape
Agisoft Metashape => Bug Reports => Topic started by: Dieter on July 26, 2022, 01:46:49 PM
-
I want to build a cylindrical Orthomosaik with three markers. Axis is marker 1 to 2. Projection origin is marker 3.
After starting the procedure, a failure "Location of marker 1 is undefined." expires.
I´ve done this several times, why is there a failure? Version is 1.8.1 build 14671.
See screenshot!
-
hello, the solution to your problem is that you might have 2 local coordinates system. If you try to select it with the selection tool the marker should be selected. If not you have to convert the reference system to the second local coordinate system. Be carefull with the reference!!!
-
"Location of marker 1 is undefined" message could be related to some bug in 1.8.1 version, that has been fixed in the later versions.
It should be possible now to use the 3D markers defined by 2+ projections on the aligned images and also markers without any projections, but checked on in the Reference pane with the input coordinates to the source values tab.