Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: Bruno Andrieu on February 03, 2014, 07:22:14 PM

Title: no mesh is produced when using openCL
Post by: Bruno Andrieu on February 03, 2014, 07:22:14 PM
Hello

When running Photoscan Pro , the system fails to calculate a mesh when OpenCl is enabled
(programm is stopped somewhere and produce nothing).

Any hint ?

Thanks

Bruno

I am using the following equipment

HP Z800 64G de RAM, bi-proc Xeon E5330 2.4GHz (2x8 cores)
   OS = CentOS 6.5
Graphic card : NVIDIA GTX 690 4G RAM
   driver : NVIDIA-Linux-x86_64-304.119

(When enabling Open CL I disactivate two CPU)
Title: Re: no mesh is produced when using openCL
Post by: Alexey Pasumansky on February 04, 2014, 10:45:12 AM
Hello Bruno,

Could you please provide the log file of the operation?

Please also check that latest drivers for the graphic card are installed.
Title: Re: no mesh is produced when using openCL
Post by: Bruno Andrieu on February 04, 2014, 05:23:41 PM
Hello Alexey

I updated the graphic card driver and it works fine now.

Thanks !

Bruno