Agisoft Metashape

Agisoft Metashape => Camera Calibration => Topic started by: julio on March 24, 2014, 12:53:39 PM

Title: How to calibrate
Post by: julio on March 24, 2014, 12:53:39 PM
Hi everybody,

I would like to know how to calibrate with Agisoft Lens. I have took some photos with a Canon 100D (fix focal length of 50 mm, fix focus and  exposition parameters fixed).
I took 6 then 12 photos and I calibrate with these two sets. Results are not the same. Errors are diminished with 12 photos but parameters are different.

Parameters should not they be the same for a camera with fix focal length and fix focus ??? 
Title: Re: How to calibrate
Post by: Minhazul Haque on June 15, 2019, 03:58:18 PM
Hello

Since you are facing a problem with calibration, you can try out our software. It is very easy to use and the calibration is perfect! The most interesting thing is you don't need any external hardware for this. The software itself does the calibration automatically.

Contact: https://cor2tect.com/ (https://cor2tect.com/)

I'm sure it can make your problems go away!!
Title: Re: How to calibrate
Post by: Lambertus on July 10, 2019, 05:45:41 AM
Hi Minhazul,

I visited the webpage you posted. However there are different products listed. Which one do you mean?
Title: Re: How to calibrate
Post by: Minhazul Haque on July 19, 2019, 07:16:07 AM
Hello

Please check the product page of the website, there is a segment called "3D Timeslice Booth Software".

https://cor2tect.com/product/timeslice-3D-booth-software.aspx (https://cor2tect.com/product/timeslice-3D-booth-software.aspx)

Here you will find software for perfect calibration. Hope I was able to help you.

Thanks