Agisoft Metashape
Agisoft Metashape => General => Topic started by: Tyler J on April 28, 2014, 11:02:07 AM
-
Hi,
I trie to do a webcam based scan it did not match anything.
After I downsized with paint a set of photos taken with regular cameras to
2Mpix and it did not match any of them.
At their standard size (18Mpix) there is no problem.
So I was wondering, is there a minimum resolution for photoscan?
Thanks.
-
don't think so, attached was taken from 640x480 stills from a video taken on a sony dsc-w120 cheapo point and shoot.
-
may be it has to be taken in 2Mp and not reduced by a software
-
Hello Eildosa,
Probably the EXIF information is lost during this downscale operation, so I recommend to correct initial calibration settings according to the downscale coefficient.