Agisoft Metashape

Agisoft Metashape => Feature Requests => Topic started by: uop360 on July 08, 2014, 09:12:52 PM

Title: Calibration (spherical camera)
Post by: uop360 on July 08, 2014, 09:12:52 PM

I propose to add calibration data from PTGUI (www.ptgui.com) or Hugin (free software) in Calibration window when adding spherical cameras.
KK

Title: Re: Calibration (spherical camera)
Post by: Alexey Pasumansky on July 12, 2014, 04:59:47 PM

Hello uop360,

Actually, the values provided by the mentioned applications contain the information on how the original images were used. Since PhotoScan uses only final panoramas (that already include all stitching) the information you've mentioned will be redundant.

It will be only useful in case the stitching should be optimized, to split the panorama back into separate pieces, but even in this case (when the stitching optimization is required) it is reasonable to work with original frames.