Agisoft Metashape
Agisoft Metashape => General => Topic started by: albatros71 on August 20, 2014, 02:17:08 PM
-
Hello,
I'm looking for the quickest method for setting the ground control points in the images. I normally have 10-15 GCPs and they have 50-60 projections, so sometimes I have more than 600-700 "flags repositions" and that?s very time-consuming.
I have to questions:
- Why I can't use the shortcuts for next image (CTRL+[)? I have to double click on the next photo every time to open it. I have an spanish keyboard layout, I don't know if that?s the reason.
- Is there any way to accept the proposed position for the flag (and convert it to a green one) without need to reposition it with the mouse? This will increase a lot the hole process.
Thanks in advance!
Best regards
-
Instead of double clicking I select the photo and hit the Enter key. I find it quicker than double clicking.
This information was clipped from this thread:
http://www.agisoft.ru/forum/index.php?topic=1335.msg6710#msg6710
"Blue and green flags are used for referencing and/or optimization, whereas grey flags are not. Grey flags have only visualization purpose to help user to find estimated marker projection."
-
- Why I can't use the shortcuts for next image (CTRL+[)? I have to double click on the next photo every time to open it. I have an spanish keyboard layout, I don't know if that?s the reason.
Possibly it is a reason, could you please try to switch to the common US/UK layout.
-
OK, changing to the US Keyboard does the trick!!
Tanks a lot Alexey!! :)
WISH: will be nice and much quicker to have also a Shortcut for accepting the propposed marker without needing to do Right-Click with the mouse.