Agisoft Metashape
Agisoft Metashape => General => Topic started by: MitoTheGreek on October 19, 2014, 02:13:39 AM
-
Hello,
I was wondering if anyone knew what processes use the GPU, my understanding is the GPU is used during the point cloud step. I have 3 Evgas 780 and I am not seeing any GPU load at all and i have all 3 check under the settings.
-
Do you have a agisoft logfile ? maybe the software has deactivated the GPU because of driver problems.
-
Hello MitoTheGreek,
GPU can be used only for building dense cloud (during depth maps estimation step) and not for sparse cloud generation (Align Photos stage).