Agisoft Metashape

Agisoft Metashape => Feature Requests => Topic started by: MeHoo on September 01, 2015, 12:49:21 AM

Title: bublcam support.
Post by: MeHoo on September 01, 2015, 12:49:21 AM

Spherical 360 stitched cameras are becoming more and more common.  It would be nice to have an option similar to the fisheye option to import these photos.

I admit, I've yet to try this with fisheye, but because of the innacuracies of the stitching, I can't see it working.  It needs to have a sort of tolerance added to the areas of stitching.  PHotoscan would need to know where these are and treat them differently or mask them.

Title: Re: bublcam support.
Post by: Alexey Pasumansky on September 01, 2015, 02:08:26 AM

Hello MeHoo,

PhotoScan Pro supports panoramas in equirectangular representation as input images.

Title: Re: bublcam support.
Post by: MeHoo on September 01, 2015, 02:10:42 AM

I'll test it out tonight, but I just forsee the stitching errors causing problems... and auto-masking of the stitch "zones" would be a nice feature I think.

I'll see how it works tonight.

Title: Re: bublcam support.
Post by: alessio on September 16, 2015, 08:39:38 PM

i already testedPanoramic images  both with ricoh Theta (wich gives only prestitched Images)
and with source file coming from Nikon D800E and 10mm
the result are quite different plus using a nodal camera gives better result
a good spherical camera would be nice in this field IF can give also the raw unstitched footage to obtain the better from both world