Agisoft Metashape

Agisoft Metashape => General => Topic started by: March Castle on December 03, 2015, 03:05:41 PM

Title: Severely Flattened Orthophoto
Post by: March Castle on December 03, 2015, 03:05:41 PM

Hello,

I am having problems creating Orthophotos - they are coming out severely flattened. I have managed to get good results with these images in the past and I don't think I have changed any of the default settings I used then.

I have aligned the images successfully and I know the GCP GPS data is accurate to within 2cm.
The Co-Ordinates system I am using is OSGB 1936 / British National Grid (EPSG:27700) - But I have tried with WGS84 and I get the same results.

Thank you for your help, March Castle.

Title: Re: Severely Flattened Orthophoto
Post by: stihl on December 03, 2015, 03:36:12 PM

Are you sure those GCP coordinates are in OSGB36? As they don't look like OSGB36 coordinates to me.

And you've tried changing the coordinate system to WGS, optimize and then export? You said this gives the same result?

Title: Re: Severely Flattened Orthophoto
Post by: Alexey Pasumansky on December 03, 2015, 05:23:36 PM

Hello March,

The coordinates do not seem to be in meters, as it should be in (EPSG:27700), they are in degrees, so I think you need to use WGS84 (EPSG::4326) or OSGB 1936 (EPSG:4277) system.