Agisoft Metashape

Agisoft Metashape => General => Topic started by: jan on May 11, 2012, 03:19:26 PM

Title: misaligned piece
Post by: jan on May 11, 2012, 03:19:26 PM
Hello,

sometimes I encounter a piece of my model being misaligned with respect to the other part of the model, while the piece is well aligned in itself (see attachment for an example).

Does anybody knows a good technique to bring such a misaligned piece back in the right position?

The misaligned piece consists of about 20 pictures, the total model consists of 1100 pictures (overlap should be ok). I've no data on camera positions.

regards,
Jan

Title: Re: misaligned piece
Post by: fpbv on May 11, 2012, 10:27:56 PM
Jan

Those images are frame video camera?
I ask because I did this and sometimes it does the same thing, the piece is aligned itself but not to all the other parts.
And there?s a lot overlapping on it.
Title: Re: misaligned piece
Post by: jan on May 12, 2012, 02:40:03 PM
Hi fpbv,

no, source images are photos taken with an interval of 5 seconds (with a Ricoh GX200). Resolution is 4000 x 3000 pix.