Agisoft Metashape

Agisoft Metashape => General => Topic started by: mzaa on September 09, 2016, 09:28:38 AM

Title: Different cameras for a one spot
Post by: mzaa on September 09, 2016, 09:28:38 AM

Can I use a different cameras for a one spot(building)?
From the air(roof), using quadrocopters.
From the ground(walls) - dlsr.

Title: Re: Different cameras for a one spot
Post by: ekbmuts on September 09, 2016, 10:40:39 PM

I've not done a lot of drone work (if any) but I can tell you that I have often shot models with multiple different cameras from different manufacturers and different lenses and the results were fine.  I think this method demands that Photoscan do a little more work/calculation, but it comes out.

Give it a shot.  Then you'll know for yourself.

Jon

Title: Re: Different cameras for a one spot
Post by: mzaa on September 10, 2016, 07:38:41 PM

You processed all photos together?

Title: Re: Different cameras for a one spot
Post by: ekbmuts on September 10, 2016, 11:49:30 PM

Yes.  From a Sony, a Canon and a Nikon.  All processed at once.  Came  out quite nicely.

Jon

Title: Re: Different cameras for a one spot
Post by: mzaa on September 13, 2016, 03:56:37 PM

THX

Quote from: ekbmuts on September 10, 2016, 11:49:30 PM

Yes.  From a Sony, a Canon and a Nikon.  All processed at once.  Came  out quite nicely.

Jon