Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: aditratama on January 25, 2017, 12:44:17 PM

Title: Alignment Issue
Post by: aditratama on January 25, 2017, 12:44:17 PM

I'm having a trouble with alignment process where alignment attempts failed and the message is "out of bounds node index". Is anyone ever get this message and know the source of the issue? Total attempted photos to be aligned are 2120 photos (source DJI phantom 3), with Alignment setting is High, Generic, 50000 key point limit and 0 tie point limit. I am suspecting 0 tie point limit as the source of the issue but I'm not really sure.

Title: Re: Alignment Issue
Post by: Alexey Pasumansky on January 25, 2017, 01:20:50 PM

Hello aditratama,

Can you also provide the full processing log from the Console pane?

Title: Re: Alignment Issue
Post by: aditratama on January 26, 2017, 05:48:18 AM

I'm afraid full processing log is gone because i didn't see the processing log at the time of the processing, perhaps because I restarted the computer. Is there any way we can get the processing log for the whole process (before the computer restarted)?

Title: Re: Alignment Issue
Post by: Alexey Pasumansky on January 26, 2017, 11:40:19 AM

Hello aditratama,

If you have redirected the log to the external text file via the corresponding option in the General tab of Preferences window, then it will be stored to the specified location.

Title: Re: Alignment Issue
Post by: Alexey Pasumansky on January 26, 2017, 12:43:31 PM

The error message, however, seems to be related to the memory issues, so I suggest to check the RAM modules using Memtest86 utility as there may be some unstable sectors.

Title: Re: Alignment Issue
Post by: aditratama on January 27, 2017, 07:58:55 AM

Thank you for the response, I will check whether there are any issues with the RAM using memtest86. I was testing the PC using windows memory diagnostic, but it didn't show any problem with the RAM.