Agisoft Metashape

Agisoft Metashape => General => Topic started by: stulboro on February 23, 2017, 09:58:54 AM

Title: FUll Frame lens on small sensor camera
Post by: stulboro on February 23, 2017, 09:58:54 AM

Hi, if I use a full frame lens on a APS-C body would it confuse the software? I have a Zeiss 25mm and the body I use is busy. There is a Nikon D2 I can borrow but it is APS-C. It is an old camera, which is why it is free but capable.

Stuart

Title: Re: FUll Frame lens on small sensor camera
Post by: JMR on February 24, 2017, 02:16:54 PM

No problem. In your case the image EXIF will not have any info about the lens and in that case Pscan will asume it is a 50mm at first which is not a lot far from the reality in your case and the program will likely estimate the actual F easily.
Regards
GEOBIT