Agisoft Metashape

Agisoft Metashape => General => Topic started by: shwetankumar on June 12, 2017, 06:21:05 AM

Title: Using calibrated parameters without recomputation
Post by: shwetankumar on June 12, 2017, 06:21:05 AM

Hi,

If we have a number of calibrated images (both intrinsic and extrinsic parameters are available), how can we use agisoft photoscan to create a dense point cloud such that those parameters are used as is and agisoft does not to modify them ? For each image, the known parameters are: camera location (x, y, z), camera rotation (3x3 matrix), focal length in pixel, principal point, distortion parameters.

Thanks

Title: Re: Using calibrated parameters without recomputation
Post by: Alexey Pasumansky on June 12, 2017, 10:47:57 AM

Hello shwetankumar,

Using Tools Menu -> Import Cameras function will load the exterior/interior orientation parameters, then you can use Build Points option from the Tools Menu to calculate matching points between images. The orientation parameters wouldn't be affected by Build Points function.