Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: Yoann Courtois on September 14, 2017, 12:58:31 PM

Title: Camera type configuration
Post by: Yoann Courtois on September 14, 2017, 12:58:31 PM
Hi !

Since a while I'm notice a problem in the Camera Calibration panel:

Indeed, when working with more than one camera in a single project, and especially when they are different in type (Frame, Fisheye), the type of a camera is sometimes changing when looking at the second camera.

Example:
A project with a fisheye (GoPro) and a frame (EOS 5D) camera:
- The GoPro is configured as fisheye lens and precalibrated.
- But when I clic on the second camera, the GoPro type change to "frame"...
- If I'm not taking care about that, it lost the precalibration and also use a frame calibration type for it...

May you fix this ?

Regards
Title: Re: Camera type configuration
Post by: Alexey Pasumansky on September 14, 2017, 01:33:42 PM
Hello Yoann,

Thank you for reporting. We'll check that and fix in the next 1.3 update.
Title: Re: Camera type configuration
Post by: Alexey Pasumansky on September 19, 2017, 08:36:24 PM
Hello Yoann,

You can check version 1.3.4 already:
http://www.agisoft.com/downloads/installer/
Title: Re: Camera type configuration
Post by: Yoann Courtois on September 25, 2017, 10:09:48 AM
Hi Alexey !

Bug fixed, well done !
Thank you