Agisoft Metashape

Agisoft Metashape => Bug Reports => Topic started by: aerialpc on March 20, 2018, 12:19:16 AM

Title: LiDAR Point Cloud Import fails always at 69%
Post by: aerialpc on March 20, 2018, 12:19:16 AM

Hello,

i tried the Point Import several times. It always stops/crashes at 69% at the Step "Calculating normals". I tried .e57 and .las with Point Clouds over 4GB.

Are the PCs too big?
Could there be a problem on my side or is there a bug?

Kind Regards,
Thomas

Title: Re: LiDAR Point Cloud Import fails always at 69%
Post by: Alexey Pasumansky on March 20, 2018, 12:32:03 AM

Hello Thomas,

Can you also specify the number of points in the cloud and the version of PhotoScan that you are using?

Title: Re: LiDAR Point Cloud Import fails always at 69%
Post by: aerialpc on March 20, 2018, 01:01:13 AM

Agisoft Version 1.4.1 build 5925

621.026.294 Points 15 GB
181.390.142 Points 4,6 GB

Title: Re: LiDAR Point Cloud Import fails always at 69%
Post by: aerialpc on March 20, 2018, 01:10:29 AM

Now it works after reducing the amount of points of the project by blockfilter to 2.891.096 Points..

Title: Re: LiDAR Point Cloud Import fails always at 69%
Post by: Alexey Pasumansky on March 22, 2018, 12:16:44 PM

Hello Thomas,

Thank you for providing the additional information, we are investigating the problem now.