Agisoft Metashape

Agisoft Metashape => General => Topic started by: vfxman222 on June 11, 2018, 07:31:40 PM

Title: Ikea Lack Photogrammetry Turntable
Post by: vfxman222 on June 11, 2018, 07:31:40 PM
Thought somebody might be interested in this DIY info. I just put together an article post going over the steps I took to convert an old Ikea Lack table into a small object capture station. Complete with Azimuth circle, 22" lazy susan, and a glass top to allow for bottom capture of items.

There are tons of photos showing the process and links to materials used.

You can view the 3 page article here:
https://www.provideocoalition.com/ikea-lack-photogrammetry-turntable/ (https://www.provideocoalition.com/ikea-lack-photogrammetry-turntable/)

Title: Re: Ikea Lack Photogrammetry Turntable
Post by: outsider on June 12, 2018, 03:37:06 PM
Thanks for sharing!

Where did you get the lazy susan from?
Title: Re: Ikea Lack Photogrammetry Turntable
Post by: vfxman222 on July 11, 2018, 08:32:49 PM
Thanks for sharing!
No problem. I had documented process anyways so I could make another if need be, or if I screwed up.  :)


Where did you get the lazy susan from?

Links to the items purchased are in the article. The Lazy Susan is from Amazon. It was a TamBee brand.