Agisoft Metashape

Agisoft Metashape => General => Topic started by: RobR78 on July 22, 2018, 06:30:04 PM

Title: Radeon RX580 - CL-PROGRAM FAILURE Line 627
Post by: RobR78 on July 22, 2018, 06:30:04 PM

Radeon RX580 PROGRAM BUILD Issue.

When enable the GPU with my Radeon RX580 running, I get an error show up for the processes where the GPU is utilised.

See attachments for spec and details.

Title: Re: Radeon RX580 - CL-PROGRAM FAILURE Line 627
Post by: Mak11 on July 22, 2018, 08:11:52 PM

The latest Radeon drivers (18.7.1) seem to have broken OpenCL support. Had to revert back to the previous one to get it to work again.

Title: Re: Radeon RX580 - CL-PROGRAM FAILURE Line 627
Post by: RobR78 on July 22, 2018, 08:16:35 PM

@Mak11 Okay, was hoping Agisoft might get there first, but I'll give that a try or just swap my cards out for NVidia until its fixed.

Title: Re: Radeon RX580 - CL-PROGRAM FAILURE Line 627
Post by: Mak11 on July 22, 2018, 10:38:38 PM

Quote from: RobR78 on July 22, 2018, 08:16:35 PM

@Mak11 Okay, was hoping Agisoft might get there first, but I'll give that a try or just swap my cards out for NVidia until its fixed.

Once you've reverted back to the previous driver release make sure to go back into the preference menu in PS and select the second RX580 that might have appeared and de-select the first one (which is the previous driver install apparently in cache..)