Forum

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 3DFranz

Pages: [1] 2 3
1
Ask Google and take a look at SIFT.
Scale invariant Feature Transform
 :)

2
Feature Requests / Re: Background Map
« on: January 02, 2019, 01:57:13 PM »
+1  including WMS would be perfect

3
General / Re: Workflow to process the Photography of "PHANTOM 4 RTK"
« on: October 31, 2018, 10:18:44 AM »
I can give it also a try, If you can share the fotos.
Be sure that you have checked (under PhotoScan settings) "load xmp Data..."

4
General / Re: Agisoft Metashape 1.5.0 pre-release
« on: October 10, 2018, 12:47:15 PM »
Orthomosaic : Refine Seamlines.

I also have a problem when building Orthomosaic with Refine Seamlines enabled.
I always get : "Bad Allocation".

...
...
11:08:44 partition updated in 221.71 sec
2018-10-10 11:08:44 loaded camera partition in 0 sec
2018-10-10 11:08:44 Refining seamlines...
2018-10-10 11:08:44 Building topology...
2018-10-10 11:24:43 Finished processing in 2090.34 sec (exit code 0)
2018-10-10 11:24:43 Error: bad allocation


5
General / Re: Agisoft Metashape 1.5.0 pre-release
« on: October 08, 2018, 10:12:32 AM »
Is there a readme-File for the planed or already included changes, compared to the aktual version?
--> Done. I was blind. Sorry

6
General / Re: 3D Print of Landscape- / City-Model
« on: August 20, 2018, 05:43:37 PM »
Thank you Alexey for our reply.
I missed that recent topic.
Thx for your help.
Best regards

7
General / 3D Print of Landscape- / City-Model
« on: August 17, 2018, 03:10:42 PM »
I would need some Advice how to PrePare an Agisoft OBJ File for 3D Printing.
It is an Landscape Model with Buildings, as example shown in the Screenshot.


The Model should be Printed in about 50 x 50 x 10 cm.
Any suggestions about the wall-thickness, or the Software to use for preparing the model for Printing?

8
General / Re: How to mesh .ply
« on: June 08, 2018, 11:38:45 AM »
Add a empty chunk and save your Project.
Then the Import should work, and the message empty region shouldt pop up anymore.

9
Python Scripting / Re: Capture image of markers
« on: June 04, 2018, 10:01:20 AM »
Any ideas how to handle this with phyton?
For my project, i would only need to export the fotos with the the markers (grey, blue and green), as .jpg in the original resolution of the fotos.

10
General / Re: 18mm on full frame
« on: January 15, 2018, 11:08:27 AM »
Concering that the A7r II has a integrated Picture Stabilisation, i would not recommend using it for Computer-Vision-Calculations.

11
General / Re: Agisoft PhotoScan 1.4.0 pre-release
« on: November 08, 2017, 05:56:20 PM »
Started Testing Import of PontClouds. (.ply)
Seems to work fine. Also the Mesh Generation.

 :)

12
+1

13
Feature Requests / Re: Dense Cloud Auto classification - buffer
« on: July 25, 2017, 12:15:52 PM »
+1

14
General / Re: Advice seeked: 3D Modelling of a Bridge
« on: June 27, 2017, 09:47:44 AM »
You also need to mask out the water areas.
Additional : Don't use Generic and Reference Precelection.
In Case of Oblique Images (=not Nadir) Reference Preselction can cause problems (or if you insit on Reference Preselction, you have to input the Ground Elevation).

Massive Overlap, and some Circle-Flights around the Bridge should help you to allign.
Dont forget to Mask the Sky and the Water areas.

15
+1

Pages: [1] 2 3