1
Bug Reports / Re: Rolling shuter DJI MINI 2
« on: May 11, 2021, 01:38:12 PM »
Hey,
here is report.
here is report.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Bug Reports / Re: Rolling shuter DJI MINI 2
« on: May 11, 2021, 10:17:19 AM »
Thanks for reply, we have controls measured with GPS (Leica 1cm). with rolling shutter off it looks OK. In both cases are heights wrong (cca 1m difference). This problem is only on mini 2. With Phantom 4 V2 is everything OK.
Kristjan
Kristjan
3
Bug Reports / Rolling shuter DJI MINI 2
« on: May 10, 2021, 10:04:31 AM »
Hey,
i'm traying to build ortomosaic with photos of DJI MINI 2 with ground points. Result with option rolling shutter enabled is worse than if rolling shutter is disabled. Red and cyan lines are correct. What can be wrong?
Best regards,
Kristjan
i'm traying to build ortomosaic with photos of DJI MINI 2 with ground points. Result with option rolling shutter enabled is worse than if rolling shutter is disabled. Red and cyan lines are correct. What can be wrong?
Best regards,
Kristjan
4
Bug Reports / Re: Crash on building dense cloud 1.4.1
« on: April 12, 2018, 01:17:03 PM »
Hello,
we download latest nvidia drivers, and now work without crash!
Kristjan
we download latest nvidia drivers, and now work without crash!
Kristjan
5
Bug Reports / Crash on building dense cloud 1.4.1
« on: April 06, 2018, 08:40:34 AM »
Hello,
we have problem building dense cloud (Pro ver. 1.4.1). Kernel failed: out of memory (2) at line 154. We have grafic card Geforce GTX980Ti. What can be reason for crash? Usually we did¨t have problems with larger foto sets.
Kristjan
Last Log details:
2018-04-05 10:28:34 timings: rectify: 0.054 disparity: 1.839 borders: 0.037 filter: 0.051 fill: 0
2018-04-05 10:28:34 [CPU] estimating 860x1093x96 disparity using 860x1093x8u tiles
2018-04-05 10:28:35 timings: rectify: 0.034 disparity: 1.111 borders: 0.023 filter: 0.033 fill: 0
2018-04-05 10:28:46
2018-04-05 10:28:46 Depth reconstruction devices performance:
2018-04-05 10:28:46 - 21% done by CPU
2018-04-05 10:28:46 - 79% done by GeForce GTX 980 Ti
2018-04-05 10:28:46 Total time: 5750.42 seconds
2018-04-05 10:28:46 CPU fallbacks: 3116
2018-04-05 10:28:46
2018-04-05 10:28:47 Finished processing in 5771.43 sec (exit code 0)
2018-04-05 10:28:47 Error:
>>> Kernel failed: out of memory (2) at line 154
we have problem building dense cloud (Pro ver. 1.4.1). Kernel failed: out of memory (2) at line 154. We have grafic card Geforce GTX980Ti. What can be reason for crash? Usually we did¨t have problems with larger foto sets.
Kristjan
Last Log details:
2018-04-05 10:28:34 timings: rectify: 0.054 disparity: 1.839 borders: 0.037 filter: 0.051 fill: 0
2018-04-05 10:28:34 [CPU] estimating 860x1093x96 disparity using 860x1093x8u tiles
2018-04-05 10:28:35 timings: rectify: 0.034 disparity: 1.111 borders: 0.023 filter: 0.033 fill: 0
2018-04-05 10:28:46
2018-04-05 10:28:46 Depth reconstruction devices performance:
2018-04-05 10:28:46 - 21% done by CPU
2018-04-05 10:28:46 - 79% done by GeForce GTX 980 Ti
2018-04-05 10:28:46 Total time: 5750.42 seconds
2018-04-05 10:28:46 CPU fallbacks: 3116
2018-04-05 10:28:46
2018-04-05 10:28:47 Finished processing in 5771.43 sec (exit code 0)
2018-04-05 10:28:47 Error:
>>> Kernel failed: out of memory (2) at line 154
6
Feature Requests / Re: Please make batch processing display time spent per step
« on: April 15, 2016, 02:48:12 PM »
+1
7
General / Re: Post Processing Software?
« on: March 24, 2016, 11:38:33 AM »
Hey,
we have arena4d - veesus (not free), you can watch video made of point cloud on youtube chanel user Pars d.o.o. Idrija!
Kristjan
we have arena4d - veesus (not free), you can watch video made of point cloud on youtube chanel user Pars d.o.o. Idrija!
Kristjan
9
Feature Requests / Re: Built dense cloud only inside of a region
« on: January 15, 2016, 02:11:48 PM »
+1
10
Bug Reports / Re: File save problem
« on: January 13, 2016, 06:48:12 PM »
Datum is old, and the changes are not saved.
11
Bug Reports / Re: File save problem
« on: January 13, 2016, 02:27:11 PM »
Hi,
no error, no blocked option, everything normal, when I save project (in menu or ikon) star that show unsaved project disappear, but project is not saved.
Status in command:
2016-01-13 12:25:41 Saving project...
2016-01-13 12:25:41 saved project in 0.044 sec
2016-01-13 12:25:41 Finished processing in 0.044 sec (exit code 1)
K
no error, no blocked option, everything normal, when I save project (in menu or ikon) star that show unsaved project disappear, but project is not saved.
Status in command:
2016-01-13 12:25:41 Saving project...
2016-01-13 12:25:41 saved project in 0.044 sec
2016-01-13 12:25:41 Finished processing in 0.044 sec (exit code 1)
K
12
Bug Reports / Re: File save problem
« on: January 13, 2016, 10:18:37 AM »
Yes, this is in version 1.2.2., work only option save as. We have windows 10.
Nice day,
kristjan
Nice day,
kristjan
13
Bug Reports / File save problem
« on: January 12, 2016, 01:31:56 PM »
Hi,
we have problem saving current project. Agisoft don’t save under command save, only if we chose option save as (and different name). What could be a problem?
Kristjan
we have problem saving current project. Agisoft don’t save under command save, only if we chose option save as (and different name). What could be a problem?
Kristjan
Pages: [1]
