Messages

1

General / hardware / result

« on: September 03, 2015, 05:52:33 AM »

hello

I wnat to know moleling result depend on hardware spec?

I'm using laptop (Gigabyte p34W) i7 4720HQ, GTX 970M, RAM 8Gb

I never get good result

when I see solid model, surface very rough

please refer to http://www.agisoft.com/forum/index.php?topic=4233.0

I studied user's manual but I can't different working as my work

how can I get good surface result?

thank you

2

General / poor result

« on: August 29, 2015, 03:10:08 AM »

Hello

please help me

I used Photoscan but my result poor than 123d catch

please look at atached file

what's wrong with me?

I think my work is somethin wrong

camera : Canon 550D
shoot : 124
focal lengh : 55mm

I compare 123d catch and photoscan result with same photos
photoscan result is poor than 123d catch!
what should I do?

3

General / Re: Surface roughness and low resolution

« on: August 26, 2015, 11:14:54 AM »

dear sastun1962

thank you for your suggest!

I try again with another item!

4

General / Re: please help me!

« on: August 26, 2015, 11:11:35 AM »

thank you dimaego!

actually I think lack of lighting

I detected my photo is not good quality

when I zoom out my photo there are poor quality

Is it help to me setting up lighting?

thank you very much dimaego!

5

General / please help me!

« on: August 26, 2015, 05:25:07 AM »

hollo
I tried again and again but I can't get good result

Please look at attached images

I can't recognized object

what is the problem with me?

this is information of shooting
1) Camera : Cannon 550D DSLR
2) ISO : 100 or 200 or 400 (I changed ISO but the result almost same)
3) F : 5.6
4) object to camera distance : 30~50cm
5) catched images : 50~80 shoots

information of photoscan work flow
1) aligning photos
  - accuracy : medium (I tried "high" but the result does not improved)
  - pair preselection : disable
  - point limit : don't care

2) builing dense point cloud
  - medium(I tried "high" but the result does not improved)

3) building mesh
  - medium(I tried "high" but the result does not improved)

please look at attached image
surface roughness is very high with poor resolution

please help me!

6

General / Surface roughness and low resolution

« on: August 26, 2015, 05:17:18 AM »

hollo
I tried again and again but I can't get good result

Please look at attached images

I can't recognized object

what is the problem with me?

this is information of shooting
1) Camera : Cannon 550D DSLR
2) ISO : 100 or 200 or 400 (I changed ISO but the result almost same)
3) F : 5.6
4) object to camera distance : 30~50cm
5) catched images : 50~80 shoots

information of photoscan work flow
1) aligning photos
  - accuracy : medium (I tried "high" but the result does not improved)
  - pair preselection : disable
  - point limit : don't care

2) builing dense point cloud
  - medium(I tried "high" but the result does not improved)

3) building mesh
  - medium(I tried "high" but the result does not improved)

please look at attached image
surface roughness is very high with poor resolution

please help me!