Forum

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 3DPLUS

Pages: [1]
1
General / Re: PhotoScan Pro vs 3DF Zephyr vs Acute 3D Smart3DCapture
« on: April 28, 2018, 01:36:56 PM »
I saw some resulted 3Dscan from 3DF Zephyr, they are good. :D
Also, IN vIETNAM, they do 3dscaning with  3DF too
Dịch vụ scan 3D: https://blogin3d.com/dich-vu-scan-3d-quet-mau-3d-tp-hcm

2
Bug Reports / Agisoft cant deal with the model with simple shape?
« on: September 25, 2017, 01:14:25 PM »
Hello,
I have tried agisoft, and the result is not good :/
I intended to scan the cup + moon cake box.
Can you suggest me the solution for this situation?
Im using sony a6000 with 35mm focal length ( 53mm equivalent)

3
Camera Calibration / Re: 35 mm film equivalent lenses meaning
« on: September 07, 2017, 10:25:36 AM »
Hi, 35mm equivalent means:  35mm focal length with fullframe camera.
With CROP camera ( like your) the, Crop ratio is about 1,6x , so. If you have 20mm lens, it will multiply 1,6 times ~36mm.
Its looked good. But, the low focus length affect the image ( objects are defromed too much than normal )
I've opened 3D scan service with Agisoft, I use Canon 60D and 40mm pancake lens.
I hope everything works well!
My website, scan 3D: https://blogin3d.com/dich-vu-scan-3d-quet-mau-3d-tp-hcm

4
Hello everyone
This topic consist of Vietnamese language.
Chào các bạn.
Mình đang kinh doanh dịch vụ máy in 3D tphcm , đang muốn nghiên cứu thêm mảng quét scan 3D bằng phương pháp chụp ảnh và dựng mẫu 3D bằng phần mềm Agisift. Không biết có ai rành rọt, chia sẻ lại 1 chút kinh nghiệm không ạ?
Đặc biệt lĩnh vực mình cần là chụp hình 3D công trường, kiến trúc...
giống như bên shop này đang làm nè:
https://www.youtube.com/watch?v=KWPRogxSEJc
Scan 3D: https://blogin3d.com/dich-vu-scan-3d-quet-mau-3d-tp-hcm

5
Other Languages / Dịch vụ máy scan 3D tp.HCM Việt Nam
« on: June 27, 2017, 06:54:18 AM »
Chào các bác.
Ở đây có ai là người Việt không ạ? Hiện em cũng đang làm bên dịch vụ máy in 3D, tuy nhiên, cần tìm đối tác scan quét mẫu 3D  giá rẻ tại tp.HCM. Em cũng có máy scan 3D nhưng đang gửi về hãng bảo trì!
Nhân tiện, nếu đầu tư hệ thống scan agisoft thì có hiệu quả không ạ? với trường hợp cần sự linh hoạt !
Website của bên em , Dịch vụ scan quét mẫu 3D: http://blogin3d.com/dich-vu-scan-3d-quet-mau-3d-tp-hcm

6
General / Re: Can not align photos when I used turning table!!!
« on: December 25, 2015, 10:12:45 AM »
And how about the import mask PANEL setting? Replacement - union - differ - intersec....?

7
General / Re: Can not align photos when I used turning table!!!
« on: December 25, 2015, 09:18:52 AM »
Hi Alexey Pasumansky.
You're very kind!
Please help me the next step:
How can I creat all mask for all photos ( by photoshop? and how?)
I saw agisoft has the function name: IMPORT MASK. But  it doesnt work for me!
Could you check the image I attacked below and tell me what should I chose?
- IMG_4430.jpg is the background
- IMG_4431.jpg is the sample shoot
- and the import mask.png is my chosen
THANKS!!

8
General / Re: Can not align photos when I used turning table!!!
« on: December 24, 2015, 01:42:41 PM »
Hi Alexey Pasumansky.
Thank you very much.
But I wonder the thing: AUTOMATIC mask the background. Could you show me some helpful link or tutorial about it?

Alexey Pasumansky: (can be automated, if you take one image of the background without the object from the same camera position)

9
General / Can not align photos when I used turning table!!!
« on: December 24, 2015, 10:27:38 AM »
Hello!
The first, wish you a merry christmas!
Im a newbie at Agisoft, I have a problem:  When I use a turning table ( with the green board behind). I can not align photos!
1.Should I mask all the photos?
2.And what is the suit setting on the align panel?
Thanks !!

Pages: [1]