1
General / Re: Differance in point cloud from old Agisoft and Metrashape
« on: September 13, 2022, 02:22:11 PM »
@Alexey Pasumansky, do you have any news in this issue?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
General / Re: Tips for improving orthophoto from drone imagery
« on: March 25, 2021, 10:56:52 AM »
I use Sparse Cloud when i generate the DEM for the Ortophoto. genretates less (almost none) )artifacts in the photo.
My goal is alway to have 80% forvard fligt overlap and between 65-75% side overlap. at volymetric flights I fly crossgrid and at 5m/sek @ 120meter (150) height, and that will result in 90/90% overlap. But is werry unesseserry.
When I generate Dense Cloud i always use MILD filtering. too mutch of the details is removed for me.
If you give me an not to big set I can see what i can generate for you, and see what parameter to use.
My goal is alway to have 80% forvard fligt overlap and between 65-75% side overlap. at volymetric flights I fly crossgrid and at 5m/sek @ 120meter (150) height, and that will result in 90/90% overlap. But is werry unesseserry.
When I generate Dense Cloud i always use MILD filtering. too mutch of the details is removed for me.
If you give me an not to big set I can see what i can generate for you, and see what parameter to use.
3
General / Re: Differance in point cloud from old Agisoft and Metrashape
« on: March 05, 2021, 02:07:53 PM »
Yes an email with the related data is sent to support adress.
4
General / Re: Differance in point cloud from old Agisoft and Metrashape
« on: March 02, 2021, 03:17:58 PM »
Nope same settings in both..
The Agisoft version was Agisoft 1.2 and Metshape 1.7.
The Agisoft version was Agisoft 1.2 and Metshape 1.7.
5
General / Re: Differance in point cloud from old Agisoft and Metrashape
« on: March 02, 2021, 02:08:01 PM »
I have tryed all different qualety settings in Metashape, non of them look like Agisoft dence cloud.
6
General / Re: Differance in point cloud from old Agisoft and Metrashape
« on: March 02, 2021, 11:01:03 AM »
See the differance with the same settings in all steps on both versions.
7
General / Differance in point cloud from old Agisoft and Metrashape
« on: February 26, 2021, 12:11:18 PM »
Hi
I noticed an differance in point cloud from old Agisoft and new metashape.
Im creating point clowk over an low forest area <5meters height of trees, and the tops of trees gets shopped off/rounded in metashape.
I'm running the same settings, well there arent that many settings to choose from more thatn qualety and filtering.
I have run both in meduim and mild.
Metashape produced a whole lot less noice than old agisoft witch is good.
Any ideas? Whats should I do differant?
Allign photos, medium, reference, Key 40'000, Tie 4000. Photo accuracy 0,1meter.
Optimize cameras
Build dense clud, medium quality, mild depth filtering.
I get differant output with lower height on trees in Metashape.
I noticed an differance in point cloud from old Agisoft and new metashape.
Im creating point clowk over an low forest area <5meters height of trees, and the tops of trees gets shopped off/rounded in metashape.
I'm running the same settings, well there arent that many settings to choose from more thatn qualety and filtering.
I have run both in meduim and mild.
Metashape produced a whole lot less noice than old agisoft witch is good.
Any ideas? Whats should I do differant?
Allign photos, medium, reference, Key 40'000, Tie 4000. Photo accuracy 0,1meter.
Optimize cameras
Build dense clud, medium quality, mild depth filtering.
I get differant output with lower height on trees in Metashape.
8
Bug Reports / Re: Orthomosaic Export Error: Unsupported Data Type: Float 16
« on: February 03, 2021, 02:37:30 PM »
If you export it as tiled 1024*1024, jpeg with world file do you get the same problem as I have when I export?
The empty tiles with background color dosent get an world file.
This would be helpful to figure out my problem.
The empty tiles with background color dosent get an world file.
This would be helpful to figure out my problem.
9
Bug Reports / Exporting tiled ortophoto not generating world files
« on: February 02, 2021, 12:43:00 PM »
When exporting tiled Ortophoto in JPEG format, the empty/background values tiles is not getting any world files.
I Get the message "error: Cant remove file: cant acess the file due to that its used bay an other processs (32) c:\temp\tile-10-01.jpg"
I cant find any program or virus program that are acessing this file. I dont have any sochonization as google drive on this folder.
I have tryed to different drive to store the files, in as out.
I Get the message "error: Cant remove file: cant acess the file due to that its used bay an other processs (32) c:\temp\tile-10-01.jpg"
I cant find any program or virus program that are acessing this file. I dont have any sochonization as google drive on this folder.
I have tryed to different drive to store the files, in as out.
10
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 31, 2020, 07:04:49 PM »
Still having the problem. I have reinstalled windows and only latest release of agisoft on the computer.
Strange.
Strange.
11
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 07, 2020, 11:14:44 AM »
Okey.... I Have narrowed this Issue down in versions...
I do not have thease issues with version 1.2.6.
I do not have thease issues with version 1.2.6.
12
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 07, 2020, 10:47:29 AM »
Hi Alex!
Nope it has nothing to do with the NAS/network drives.
I have the error if I export to jpeg but not TIFF... So I think they are related.
I dident have this problem with version 1.4.3 witch was ther prevously one we used, gonna try to reinstall the old 1.4.3 version an see if its still a problem.
2020-01-07 08:38:57 ExportOrthomosaic: block_height = 1024, block_width = 1024, image_format = JPEG, path = F:/x_Raster_Out/431-1/431.jpg, projection = WGS 84, resolution_x = 3.41747e-07, resolution_y = 1.61264e-07, save_alpha = off, save_world = on, split_in_blocks = on, white_background = off
2020-01-07 08:39:04 Error: Can't remove file: Det går inte att komma åt filen eftersom den
2020-01-07 08:39:04 används av en annan process (32): F:/x_Raster_Out/431-1/431-22-3.jpg
2020-01-07 08:39:04 Finished processing in 7.009 sec (exit code 0)
2020-01-07 08:39:04 Error: Aborted by user
2020-01-07 08:39:20 ExportOrthomosaic: block_height = 1024, block_width = 1024, image_format = TIFF, path = F:/x_Raster_Out/431-1/431.tif, projection = WGS 84, resolution_x = 3.41747e-07, resolution_y = 1.61264e-07, save_alpha = off, save_world = on, split_in_blocks = on, white_background = off
2020-01-07 08:39:20 Exporting orthomosaic...
2020-01-07 08:39:20 generating 23359 x 36295 raster in 23 x 36 tiles,
2020-01-07 08:39:27 Finished processing in 6.982 sec (exit code 1)
Nope it has nothing to do with the NAS/network drives.
I have the error if I export to jpeg but not TIFF... So I think they are related.
I dident have this problem with version 1.4.3 witch was ther prevously one we used, gonna try to reinstall the old 1.4.3 version an see if its still a problem.
2020-01-07 08:38:57 ExportOrthomosaic: block_height = 1024, block_width = 1024, image_format = JPEG, path = F:/x_Raster_Out/431-1/431.jpg, projection = WGS 84, resolution_x = 3.41747e-07, resolution_y = 1.61264e-07, save_alpha = off, save_world = on, split_in_blocks = on, white_background = off
2020-01-07 08:39:04 Error: Can't remove file: Det går inte att komma åt filen eftersom den
2020-01-07 08:39:04 används av en annan process (32): F:/x_Raster_Out/431-1/431-22-3.jpg
2020-01-07 08:39:04 Finished processing in 7.009 sec (exit code 0)
2020-01-07 08:39:04 Error: Aborted by user
2020-01-07 08:39:20 ExportOrthomosaic: block_height = 1024, block_width = 1024, image_format = TIFF, path = F:/x_Raster_Out/431-1/431.tif, projection = WGS 84, resolution_x = 3.41747e-07, resolution_y = 1.61264e-07, save_alpha = off, save_world = on, split_in_blocks = on, white_background = off
2020-01-07 08:39:20 Exporting orthomosaic...
2020-01-07 08:39:20 generating 23359 x 36295 raster in 23 x 36 tiles,
2020-01-07 08:39:27 Finished processing in 6.982 sec (exit code 1)
13
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 06, 2020, 10:47:17 PM »
1.5 and version 1.6 have The same issue, The last posts are with 1.6.
14
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 06, 2020, 07:51:13 PM »
updated python, java to newest version, still the same.
15
Bug Reports / Re: No world file exporting to other file format than Tiff
« on: January 06, 2020, 07:40:19 PM »
installed the newest version still the same problem..
Plus i get this new "error"
2020-01-06 17:35:55 Error: Can't remove file: Det går inte att komma åt filen eftersom den
2020-01-06 17:35:55 används av en annan process (32): F:/x_Raster_Out/431_4_nyaste agisoft/431-20-35.jpg
"Det går inte att komma åt filen eftersom den används av en annan process (32) "
Translated into; Cant acess file due to that it is used by an other operation (32)
But I get the files, but with the same result in blank tiles without world files.
Plus i get this new "error"
2020-01-06 17:35:55 Error: Can't remove file: Det går inte att komma åt filen eftersom den
2020-01-06 17:35:55 används av en annan process (32): F:/x_Raster_Out/431_4_nyaste agisoft/431-20-35.jpg
"Det går inte att komma åt filen eftersom den används av en annan process (32) "
Translated into; Cant acess file due to that it is used by an other operation (32)
But I get the files, but with the same result in blank tiles without world files.
Pages: [1] 2
