Forum

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - eltama

Pages: [1] 2
1
Bug Reports / Re: Refine Mesh error 1.7.3 12743
« on: July 28, 2021, 02:12:00 PM »
Now it's working, thank you so much  :D

2
Bug Reports / Re: Refine Mesh error 1.7.3 12743
« on: July 23, 2021, 06:26:38 PM »
Driver studio 471.41, I tried without success to compute with only one GPU

3
Bug Reports / Refine Mesh error 1.7.3 12743
« on: July 22, 2021, 06:45:37 PM »
Hello Alexey
Every project will end after loading 61 MB TIFF 8bit compressed images, even with low quality,  any suggestion?
Best regards
Elmar

2021-07-22 17:10:04 Found 2 GPUs in 0 sec (CUDA: 0 sec, OpenCL: 0 sec)
2021-07-22 17:10:04 RefineMesh: quality = High, iterations = 5, smoothness = 1
2021-07-22 17:10:04 Initializing...
2021-07-22 17:10:04 Found 2 GPUs in 0.001 sec (CUDA: 0 sec, OpenCL: 0.001 sec)
2021-07-22 17:10:04 Using device: NVIDIA GeForce RTX 3090, 82 compute units, free memory: 23324/24576 MB, compute capability 8.6
2021-07-22 17:10:04   driver/runtime CUDA: 11040/8000
2021-07-22 17:10:04   max work group size 1024
2021-07-22 17:10:04   max work item sizes [1024, 1024, 64]
2021-07-22 17:10:04 Using device: NVIDIA GeForce RTX 3090, 82 compute units, free memory: 23034/24576 MB, compute capability 8.6
2021-07-22 17:10:04   driver/runtime CUDA: 11040/8000
2021-07-22 17:10:04   max work group size 1024
2021-07-22 17:10:04   max work item sizes [1024, 1024, 64]
2021-07-22 17:10:04 Device 'NVIDIA GeForce RTX 3090' has 23069 Mb of free memory
2021-07-22 17:10:05 Device 'NVIDIA GeForce RTX 3090' has 22779 Mb of free memory
2021-07-22 17:10:05 Analyzing mesh...
2021-07-22 17:10:06 Faces: 500000, Vertices: 250258
2021-07-22 17:10:06 Memory required on each device: 690 Mb + 104 Mb = 795 Mb
2021-07-22 17:10:06 Using device 'NVIDIA GeForce RTX 3090' in concurrent. (2 times)
2021-07-22 17:10:06 Using device 'NVIDIA GeForce RTX 3090' in concurrent. (2 times)
2021-07-22 17:10:26 Stage #1 out of 3
2021-07-22 17:10:27 Faces: 500000, Vertices: 250258
2021-07-22 17:10:27 Memory required on each device: 43 Mb + 104 Mb = 148 Mb
2021-07-22 17:10:27 Subdividing mesh...
2021-07-22 17:10:33 Faces: 1215002, Vertices: 607759
2021-07-22 17:10:33 Memory required on each device: 194 Mb + 254 Mb = 449 Mb
2021-07-22 17:10:34 Loading photos...
2021-07-22 17:12:06 loaded photos in 91.78 seconds
2021-07-22 17:12:06 Refining model...
2021-07-22 17:12:17 Iteration #1 out of 5
2021-07-22 17:12:37 Iteration #2 out of 5
2021-07-22 17:12:56 Iteration #3 out of 5
2021-07-22 17:13:15 Iteration #4 out of 5
2021-07-22 17:13:35 Iteration #5 out of 5
2021-07-22 17:13:54 Stage #2 out of 3
2021-07-22 17:13:54 Faces: 1215002, Vertices: 607759
2021-07-22 17:13:54 Memory required on each device: 172 Mb + 254 Mb = 427 Mb
2021-07-22 17:13:55 Subdividing mesh...
2021-07-22 17:14:10 Faces: 4104200, Vertices: 2052358
2021-07-22 17:14:10 Memory required on each device: 779 Mb + 861 Mb = 1640 Mb
2021-07-22 17:14:11 Loading photos...
2021-07-22 17:14:14 Finished processing in 250.786 sec (exit code 0)
2021-07-22 17:14:14 Error: Kernel failed: invalid device pointer (17) at line 99

4
Feature Requests / Re: Select point cloud by color
« on: January 27, 2021, 04:58:56 PM »
Thak you Alexey ;)
very usefull script.

5
General / Re: Agisoft Metashape 1.7.0 pre-release
« on: January 11, 2021, 06:25:10 PM »
Hello Andreas
Try to connet RTX 2080 S to your monitor, so the GTX 1660 VRAM is completly free, close all other apps and lower monitor resolution.
Hope u fix it.
Regards
Elmar 

6
General / Re: Agisoft Metashape 1.7.0 pre-release
« on: January 03, 2021, 05:41:20 AM »
Hello Alexy
Same error here, metashape quit without error in the log fle, mesh set  in highest and high quality:

2021-01-03 03:24:41 Agisoft Metashape Standard Version: 1.7.0 build 11736 (64 bit)
2021-01-03 03:24:41 Platform: Windows
2021-01-03 03:24:41 CPU: AMD Ryzen Threadripper 1950X 16-Core Processor (desktop)
2021-01-03 03:24:41 CPU family: 23 model: 1 signature: 800F11h
2021-01-03 03:24:41 RAM: 127.9 GB
2021-01-03 03:24:42 OpenGL Vendor: NVIDIA Corporation
2021-01-03 03:24:42 OpenGL Renderer: GeForce RTX 2080 SUPER/PCIe/SSE2
2021-01-03 03:24:42 OpenGL Version: 4.6.0 NVIDIA 460.89
2021-01-03 03:24:42 Maximum Texture Size: 32768
2021-01-03 03:24:42 Quad Buffered Stereo: not enabled
2021-01-03 03:24:42 ARB_vertex_buffer_object: supported
2021-01-03 03:24:42 ARB_texture_non_power_of_two: supported
2021-01-03 03:24:46 Loading project...
2021-01-03 03:24:49 loaded project in 3.165 sec
2021-01-03 03:24:49 Finished processing in 3.198 sec (exit code 1)
2021-01-03 03:25:06 checking for missing images...Checking for missing images...
2021-01-03 03:25:12  done in 5.853 sec
2021-01-03 03:25:12 Finished processing in 5.853 sec (exit code 1)
2021-01-03 03:25:12 BuildModel: quality = High, depth filtering = Mild, PM version, source data = Depth maps, surface type = Arbitrary, face count = High, volumetric masking = 0, OOC version, interpolation = Enabled, vertex colors = 1
2021-01-03 03:25:12 Generating depth maps...
2021-01-03 03:25:12 Preparing 9964 cameras info...
2021-01-03 03:25:26 cameras data loaded in 13.268 s
2021-01-03 03:26:12 cameras graph built in 46.628 s
2021-01-03 03:26:12 filtering neighbors with too low common points, threshold=50...
2021-01-03 03:26:12 Camera 3878 has no neighbors
2021-01-03 03:26:12 Camera 3888 has no neighbors
2021-01-03 03:26:12 Camera 4026 has no neighbors
2021-01-03 03:26:12 Camera 4571 has no neighbors
...
2021-01-03 03:26:12 avg neighbors before filtering: 634.779 (90% filtered out)
2021-01-03 03:26:12 limiting neighbors to 40 best...
2021-01-03 03:27:32 avg neighbors before limiting: 61.1616 (55% limited out)
2021-01-03 03:27:32 neighbors number min/1%/10%/median/90%/99%/max: 0, 0, 6, median=37, 40, 40, 40
2021-01-03 03:27:32 cameras info prepared in 139.811 s
2021-01-03 03:27:35 saved cameras info in 3.159
2021-01-03 03:27:35 Partitioning 9964 cameras...
2021-01-03 03:27:35 number of mini clusters: 767
2021-01-03 03:27:35 256 groups: avg_ref=38.9219 avg_neighb=187.617 total_io=582%
2021-01-03 03:27:35 max_ref=39 max_neighb=381 max_total=420
2021-01-03 03:27:35 cameras partitioned in 0.071 s
2021-01-03 03:27:35 saved depth map partition in 0.011 sec
2021-01-03 03:27:39 loaded cameras info in 3.503
2021-01-03 03:27:39 loaded depth map partition in 0.01 sec
2021-01-03 03:27:39 already partitioned (38<=50 ref cameras, 184<=200 neighb cameras)
2021-01-03 03:27:39 group 1/1: preparing 222 cameras images...
2021-01-03 03:27:39 point cloud loaded in 0.086 s
2021-01-03 03:27:40 Found 2 GPUs in 0.174 sec (CUDA: 0.063 sec, OpenCL: 0.111 sec)
2021-01-03 03:27:40 Using device: GeForce RTX 2080 SUPER, 48 compute units, free memory: 6646/8192 MB, compute capability 7.5
2021-01-03 03:27:40   driver/runtime CUDA: 11020/8000
2021-01-03 03:27:40   max work group size 1024
2021-01-03 03:27:40   max work item sizes [1024, 1024, 64]
2021-01-03 03:27:40 Using device: GeForce RTX 2080 SUPER, 48 compute units, free memory: 6693/8192 MB, compute capability 7.5
2021-01-03 03:27:40   driver/runtime CUDA: 11020/8000
2021-01-03 03:27:40   max work group size 1024
2021-01-03 03:27:40   max work item sizes [1024, 1024, 64]
2021-01-03 03:29:10 group 1/1: cameras images prepared in 90.406 s
2021-01-03 03:29:10 group 1/1: expected peak VRAM usage: 4970 MB (775 MB max alloc, 9630x14397 mipmap texture, 40 max neighbors)
2021-01-03 03:29:10 group 1/1: 222 x frame
2021-01-03 03:29:10 group 1/1: 222 x uint8
2021-01-03 03:29:10 Found 2 GPUs in 0 sec (CUDA: 0 sec, OpenCL: 0 sec)
2021-01-03 03:29:10 Using device: GeForce RTX 2080 SUPER, 48 compute units, free memory: 6639/8192 MB, compute capability 7.5
2021-01-03 03:29:10   driver/runtime CUDA: 11020/8000
2021-01-03 03:29:10   max work group size 1024
2021-01-03 03:29:10   max work item sizes [1024, 1024, 64]
2021-01-03 03:29:10 Using device: GeForce RTX 2080 SUPER, 48 compute units, free memory: 6693/8192 MB, compute capability 7.5
2021-01-03 03:29:10   driver/runtime CUDA: 11020/8000
2021-01-03 03:29:10   max work group size 1024
2021-01-03 03:29:10   max work item sizes [1024, 1024, 64]
2021-01-03 03:29:10 [GPU 1] group 1/1: estimating depth map for 1/38 camera 225 (9 neighbs)...
2021-01-03 03:29:10 [GPU 2] group 1/1: estimating depth map for 2/38 camera 513 (40 neighbs)...
2021-01-03 03:30:14 Agisoft Metashape Standard Version: 1.7.0 build 11736 (64 bit)
2021-01-03 03:30:14 Platform: Windows
2021-01-03 03:30:14 CPU: AMD Ryzen Threadripper 1950X 16-Core Processor (desktop)
2021-01-03 03:30:14 CPU family: 23 model: 1 signature: 800F11h
2021-01-03 03:30:14 RAM: 127.9 GB
2021-01-03 03:30:14 OpenGL Vendor: NVIDIA Corporation
2021-01-03 03:30:14 OpenGL Renderer: GeForce RTX 2080 SUPER/PCIe/SSE2
2021-01-03 03:30:14 OpenGL Version: 4.6.0 NVIDIA 460.89
2021-01-03 03:30:14 Maximum Texture Size: 32768
2021-01-03 03:30:14 Quad Buffered Stereo: not enabled
2021-01-03 03:30:14 ARB_vertex_buffer_object: supported
2021-01-03 03:30:14 ARB_texture_non_power_of_two: supported

Happy New Year!

7
Feature Requests / Re: Select point cloud by color
« on: December 25, 2020, 04:29:17 PM »
Hello Alexey
I mean sparse point, but thanks for the tip, I always create mesh from depth map, is much better for my works.
Marry Xmas

8
Feature Requests / Select point cloud by color
« on: December 23, 2020, 01:55:11 PM »
Hi all
It will be great to select every point cloud by specific color or selection with that color, like select - silmilar in Photoshop.
Have a nice day.
Elmar

9
General / Re: Agisoft Metashape 1.7.0 pre-release
« on: December 17, 2020, 08:20:07 PM »
Hello Alexey
Thank you for the tip, (I try Memtest86 with this clock frequencies and with a lower one) but now I can fix the problem with studio driver 457.30, I had to stop my simulation with BuildModel: quality = Ultra high, it will take more than 30 days probably due 61MB  x 3678 cameras, but with a BuildModel: quality = high is fine and done with only 3 days, congratualtion, much better detail then 1.65, still some "onion" layers over surfaces, in my simulation, I accidentally mix 25mm set with 24mm images, some of them are made with focus stacking tecnique, I do same simulation with 1.65 and post comparison.
Thanks

10
General / Re: Agisoft Metashape 1.7.0 pre-release
« on: December 13, 2020, 10:42:41 PM »
Hello Alexey
Metashape version: 11539, Os Win 10 Pro: build 19042.685, version 20H2, Nvidia driver:  Game studio 457.51.
Now I build mesh again with the same confiration but with Nvidia driver: studio driver 457.30

11
General / Re: Agisoft Metashape 1.7.0 pre-release
« on: December 13, 2020, 03:32:47 AM »
Hello
I got this error, latest build, JPG images only (no openxr):
2020-12-11 17:39:59 BuildModel: quality = Ultra high, depth filtering = Mild, PM version, reuse depth maps, source data = Depth maps, surface type = Arbitrary, face count = 90000000, volumetric masking = 0, OOC version, interpolation = Enabled, vertex colors = 1
2020-12-11 17:39:59 Generating mesh...
2020-12-11 17:39:59 Compression level: 1
2020-12-11 17:39:59 Preparing depth maps...
2020-12-11 17:39:59 3678 depth maps
...
2020-12-13 01:04:19 Devices performance:
2020-12-13 01:04:19  - 56%    done by [GPU 1]  with timings: 1801 s = 0% load hists + 47% load cams + 3% calcs
2020-12-13 01:04:19  - 42%    done by [GPU 2]  with timings: 1801 s = 0% load hists + 48% load cams + 2% calcs
2020-12-13 01:04:19  - 2%    done by [GPU 3]  with timings: 1801 s = 0% load hists + 60% load cams + 0% calcs
2020-12-13 01:04:26 finished group #19/189: 2946 cameras, 1826.85 s working (0% files opening + 59% IO + 41% unpacking + 0% queueing)
2020-12-13 01:04:27 Initing hists in leaves group #20/189: [512; 549)...
2020-12-13 01:04:38 total cubes: 108923782 cubes, 1662.05 MB, 144.828 MB/s
2020-12-13 01:04:38 Data: 2493.07 MB hists, 640.062 MB pyramid
2020-12-13 01:04:38 Found 3 GPUs in 0.001 sec (CUDA: 0 sec, OpenCL: 0.001 sec)
2020-12-13 01:04:39 [GPU 1] Using device: GeForce RTX 2060 SUPER, 34 compute units, free memory: 7174/8192 MB, compute capability 7.5
2020-12-13 01:04:39   driver/runtime CUDA: 11010/8000
2020-12-13 01:04:39   max work group size 1024
2020-12-13 01:04:39   max work item sizes [1024, 1024, 64]
2020-12-13 01:04:39 [GPU 2] Using device: GeForce RTX 2060 SUPER, 34 compute units, free memory: 7108/8192 MB, compute capability 7.5
2020-12-13 01:04:39   driver/runtime CUDA: 11010/8000
2020-12-13 01:04:39   max work group size 1024
2020-12-13 01:04:39   max work item sizes [1024, 1024, 64]
2020-12-13 01:04:39 [GPU 3] Using device: GeForce RTX 2080 SUPER, 48 compute units, free memory: 6852/8192 MB, compute capability 7.5
2020-12-13 01:04:39   driver/runtime CUDA: 11010/8000
2020-12-13 01:04:39   max work group size 1024
2020-12-13 01:04:39   max work item sizes [1024, 1024, 64]
2020-12-13 01:08:01 openexr error: Error reading pixel data from image file "openexr". Data decompression (zlib) failed.
2020-12-13 01:08:14 [GPU 1] Exception
2020-12-13 01:08:14 [GPU 3] Exception
2020-12-13 01:08:14 [GPU 2] Exception
2020-12-13 01:08:14 Peak memory used: 70.67 GB at 2020-12-11 18:49:49
2020-12-13 01:08:14 deleting all temporary files...
2020-12-13 01:09:03 done in 49.356 s
2020-12-13 01:09:03 Finished processing in 113343 sec (exit code 0)
2020-12-13 01:09:03 Error: Can't decompress depth

12
General / Re: Workflow - Dense cloud generation ignoring masks
« on: July 10, 2020, 01:31:22 PM »
I had same problem, now I try to build mesh from depth maps to see differences, I'll share result ASAP

13
General / Re: Agisoft Metashape 1.6.0 pre-release
« on: January 22, 2020, 02:01:16 AM »
Hello eltama,

Do you have these errors during the depth maps generation step or already during the mesh reconstruction (all depth maps are already generated)?

Just had the same error on Metashape 1.6.0 build 9925 at the end of mesh generation.
This project was stored on a folder that dropbox has access to. Maybe there is a similar problem with the access rights.

I have this error even in build 10009:

...
2020-01-21 19:33:17 Devices performance:
2020-01-21 19:33:17  - 2%    done by [GPU 1]  with timings: 315 s = 1% load hists + 67% load cams + 4% calcs
2020-01-21 19:33:17  - 49%    done by [GPU 2]  with timings: 315 s = 0% load hists + 45% load cams + 34% calcs
2020-01-21 19:33:17  - 49%    done by [GPU 3]  with timings: 315 s = 0% load hists + 48% load cams + 30% calcs
2020-01-21 19:33:27 finished group #36/60: 8625 cameras, 381.065 s working (0% files opening + 28% IO + 65% unpacking + 3% queueing)
2020-01-21 19:33:27 Initing hists in leaves group #37/60: [517; 528)...
2020-01-21 19:33:41 total cubes: 108995332 cubes, 1663.14 MB, 124.888 MB/s
2020-01-21 19:34:01 Data: 2494.71 MB hists, 39.9879 MB pyramid
2020-01-21 19:34:01 Found 3 GPUs in 0.002 sec (CUDA: 0.001 sec, OpenCL: 0.001 sec)
2020-01-21 19:34:02 [GPU 1] Using device: GeForce RTX 2070 SUPER, 40 compute units, free memory: 6711/8192 MB, compute capability 7.5
2020-01-21 19:34:02   driver/runtime CUDA: 10020/8000
2020-01-21 19:34:02   max work group size 1024
2020-01-21 19:34:02   max work item sizes [1024, 1024, 64]
2020-01-21 19:34:02 [GPU 2] Using device: GeForce RTX 2070 SUPER, 40 compute units, free memory: 6711/8192 MB, compute capability 7.5
2020-01-21 19:34:02   driver/runtime CUDA: 10020/8000
2020-01-21 19:34:02   max work group size 1024
2020-01-21 19:34:02   max work item sizes [1024, 1024, 64]
2020-01-21 19:34:02 [GPU 3] Using device: GeForce RTX 2080 Ti, 68 compute units, free memory: 9158/11264 MB, compute capability 7.5
2020-01-21 19:34:02   driver/runtime CUDA: 10020/8000
2020-01-21 19:34:02   max work group size 1024
2020-01-21 19:34:02   max work item sizes [1024, 1024, 64]
2020-01-21 19:36:55 [GPU 2] Exception!
2020-01-21 19:36:55 [GPU 3] Exception!
2020-01-21 19:36:55 [GPU 1] Exception!
2020-01-21 19:36:56 Peak memory used: 24.71 GB at 2020-01-21 15:58:16
2020-01-21 19:36:56 deleting all temporary files...
2020-01-21 19:37:14 done in 18.331 s
2020-01-21 19:37:14 Finished processing in 32796.9 sec (exit code 0)
2020-01-21 19:37:14 Error: Internal error 239166172! Info: {0x0, 0x0-2406x1584, 2406x1584}

Now I try to build mesh from Dense points

14
General / Re: Agisoft Metashape 1.6.0 pre-release
« on: January 21, 2020, 06:47:56 PM »
20.1.3 is out today

15
General / Re: Agisoft Metashape 1.6.0 pre-release
« on: January 10, 2020, 11:13:03 PM »
Hello eltama,

Can you please confirm that the same issue is observed in the release version 9925?

Hello Alexey

of course, I make new alignement in 9925 in highest mode without error, now I'm waiting for build mesh from deph map (no resume) in highest mode too, images are 61MP.

Hello Alexey

 I did new alignement on highest mode on 9925, build mesh in ultra high is fine but after build deph map there was an error:


2019-12-31 23:58:39 BuildModel: quality = High, depth filtering = Mild, source data = Depth maps, surface type = Arbitrary, face count = High, volumetric masking = 0, OOC version, interpolation = Enabled, vertex colors = 1
2019-12-31 23:58:40 Generating depth maps...
2019-12-31 23:58:40 Initializing...
2019-12-31 23:58:40 sorting point cloud... done in 0.044 sec
2019-12-31 23:58:40 processing matches... done in 1.525 sec
2019-12-31 23:58:41 initializing...
2019-12-31 23:58:53 selected 9819 cameras from 10272 in 12.149 sec
2019-12-31 23:58:54 groups: 98 98 98 98 98 98 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 99 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 99 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 99 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 98 99 98 98 98 98 99 98 99
2019-12-31 23:58:54 29050 of 9819 used (295.855%)
2019-12-31 23:58:54 scheduled 100 depth map groups
2019-12-31 23:58:54 saved depth map partition in 0.297 sec
2019-12-31 23:59:02 loaded depth map partition in 7.641 sec
2019-12-31 23:59:02 Initializing...
2019-12-31 23:59:02 Found 3 GPUs in 0.029 sec (CUDA: 0.028 sec, OpenCL: 0.001 sec)
2019-12-31 23:59:10 Using device: GeForce RTX 2070 SUPER, 40 compute units, free memory: 6711/8192 MB, compute capability 7.5
2019-12-31 23:59:10   driver/runtime CUDA: 10020/8000
2019-12-31 23:59:10   max work group size 1024
2019-12-31 23:59:10   max work item sizes [1024, 1024, 64]
2019-12-31 23:59:10   got device properties in 0.007 sec, free memory in 8.736 sec
2019-12-31 23:59:11 Using device: GeForce RTX 2070 SUPER, 40 compute units, free memory: 6711/8192 MB, compute capability 7.5
2019-12-31 23:59:11   driver/runtime CUDA: 10020/8000
2019-12-31 23:59:11   max work group size 1024
2019-12-31 23:59:11   max work item sizes [1024, 1024, 64]
2019-12-31 23:59:11 Using device: GeForce RTX 2080 Ti, 68 compute units, free memory: 9133/11264 MB, compute capability 7.5
2019-12-31 23:59:11   driver/runtime CUDA: 10020/8000
2019-12-31 23:59:11   max work group size 1024
2019-12-31 23:59:11   max work item sizes [1024, 1024, 64]
2019-12-31 23:59:11 Using CUDA device 'GeForce RTX 2070 SUPER' in concurrent. (2 times)
2019-12-31 23:59:11 Using CUDA device 'GeForce RTX 2070 SUPER' in concurrent. (2 times)
2019-12-31 23:59:11 Using CUDA device 'GeForce RTX 2080 Ti' in concurrent. (2 times)
2019-12-31 23:59:12 Loading photos...
2020-01-01 00:00:42 loaded photos in 89.377 seconds
2020-01-01 00:00:42 Generating depth maps...
2020-01-01 00:00:43 [GPU] estimating 3754x3093x1056 disparity using 1252x1088x8u tiles
2020-01-01 00:00:43 [GPU] estimating 3415x3255x864 disparity using 1139x1088x8u tiles
...
2020-01-09 09:35:26 Depth reconstruction devices performance:
2020-01-09 09:35:26  - 49%    done by GeForce RTX 2080 Ti
2020-01-09 09:35:26  - 28%    done by GeForce RTX 2070 SUPER
2020-01-09 09:35:26  - 23%    done by GeForce RTX 2070 SUPER
2020-01-09 09:35:26 Total time: 4930.66 seconds
2020-01-09 09:35:26
2020-01-09 09:35:26 98 depth maps generated in 5007.46 sec
2020-01-09 09:35:30 saved depth maps block in 3.577 sec
2020-01-09 09:48:04 loaded depth map partition in 750.023 sec
2020-01-09 09:48:04 Building model...
2020-01-09 09:48:04 Compression level: 1
2020-01-09 09:48:04 Preparing depth maps...
2020-01-09 09:48:04 scheduled 100 depth map groups (9772 cameras)
2020-01-09 09:48:04 saved camera partition in 0.005 sec
2020-01-09 09:48:04 loaded camera partition in 0.002 sec
2020-01-09 09:55:11 saved group #1/100: done in 426.708 s, 98 cameras, 14063 MB data, 207.102 KB registry
2020-01-09 09:55:11 loaded camera partition in 0.001 sec
2020-01-09 10:02:26 saved group #2/100: done in 434.326 s, 98 cameras, 14561.7 MB data, 207.102 KB registry
2020-01-09 10:02:26 loaded camera partition in 0.001 sec
2020-01-09 10:09:10 saved group #3/100: done in 404.787 s, 98 cameras, 4404.62 MB data, 207.102 KB registry
2020-01-09 10:09:10 loaded camera partition in 0.001 sec
2020-01-09 10:16:01 saved group #4/100: done in 410.263 s, 98 cameras, 6907.82 MB data, 207.102 KB registry
2020-01-09 10:16:01 loaded camera partition in 0.002 sec
2020-01-09 10:23:04 saved group #5/100: done in 423.715 s, 98 cameras, 7168.78 MB data, 207.102 KB registry
2020-01-09 10:23:04 loaded camera partition in 0.001 sec
2020-01-09 10:30:12 saved group #6/100: done in 427.896 s, 98 cameras, 10572.1 MB data, 207.102 KB registry
2020-01-09 10:30:12 loaded camera partition in 0.001 sec
2020-01-09 10:37:17 saved group #7/100: done in 424.942 s, 98 cameras, 9835.96 MB data, 207.102 KB registry
2020-01-09 10:37:17 loaded camera partition in 0.001 sec
2020-01-09 10:44:34 saved group #8/100: done in 436.523 s, 98 cameras, 12499.9 MB data, 207.102 KB registry
2020-01-09 10:44:34 loaded camera partition in 0.001 sec

depth maps done

2020-01-09 09:35:26 98 depth maps generated in 5007.46 sec
2020-01-09 09:35:30 saved depth maps block in 3.577 sec
2020-01-09 09:48:04 loaded depth map partition in 750.023 sec
2020-01-09 09:48:04 Building model...
2020-01-09 09:48:04 Compression level: 1
2020-01-09 09:48:04 Preparing depth maps...
2020-01-09 09:48:04 scheduled 100 depth map groups (9772 cameras)
2020-01-09 09:48:04 saved camera partition in 0.005 sec
2020-01-09 09:48:04 loaded camera partition in 0.002 sec
2020-01-09 09:55:11 saved group #1/100: done in 426.708 s, 98 cameras, 14063 MB data, 207.102 KB registry
2020-01-09 09:55:11 loaded camera partition in 0.001 sec
...
2020-01-09 19:29:15 saved group #82/100: done in 422.132 s, 98 cameras, 5447.74 MB data, 207.102 KB registry
2020-01-09 19:29:15 loaded camera partition in 0.001 sec
2020-01-09 19:36:19 saved group #83/100: done in 424.036 s, 98 cameras, 6125.03 MB data, 207.102 KB registry
2020-01-09 19:36:19 loaded camera partition in 0.001 sec
2020-01-09 19:43:32 saved group #84/100: done in 432.451 s, 98 cameras, 9505.05 MB data, 207.102 KB registry
2020-01-09 19:43:32 loaded camera partition in 0.001 sec
2020-01-09 19:48:47 Peak memory used: 69.97 GB at 2020-01-09 11:51:13
2020-01-09 19:48:47 deleting all temporary files...
2020-01-09 19:49:01 done in 14.298 s
2020-01-09 19:49:01 Finished processing in 473553 sec (exit code 0)
2020-01-09 19:49:01 Error: Too small depth map!

Now I try to generate deph maps on Higt setting.

I attach the task manager data, In a ultra high deph map generation it seems a low GPU work due to a low vram usage on  rtx 2070 s (8 GB) only ~ 2.5 GB compared to on 2080 ti (11GB) ~ 5 GB.

2020-01-09 09:35:26  - 49%    done by GeForce RTX 2080 Ti
2020-01-09 09:35:26  - 28%    done by GeForce RTX 2070 SUPER
2020-01-09 09:35:26  - 23%    done by GeForce RTX 2070 SUPER

in a high deph map generation I noticed a full use of GPU computing and more VRAM usage into the weaker GPU

I haven't the log but it was ~ like this:

  - 40%    done by GeForce RTX 2080 Ti
  - 32%    done by GeForce RTX 2070 SUPER
  - 28%    done by GeForce RTX 2070 SUPER

Best regards

Elmar




Pages: [1] 2