Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - NORIM

Pages: [1] 2
Bug Reports / Re: Transform object doesn't work
« on: August 06, 2022, 02:09:57 PM »
That happens when WGS 84 cordinate system is used in model.

Bug Reports / Transform object doesn't work
« on: August 06, 2022, 01:52:16 PM »
Hi I created model from aerial photos and I would like to cerate ortophoto from mesh. Spare cloud is rotated and X, Y and Z axis are bed. So I did Model/Transform Object/ Reset Transform because other options were greyed next I did Model/Transform Object/Rotate Object and set model correctly...after that I tried to "Update Transform" but after that model is again in bed position. I am using 1.8.3 Metashape Professional version...

Bug Reports / Re: JPG aligned Tiff not
« on: March 05, 2020, 04:25:31 PM »
Ok so JPG and CR2 (with embed JPGs) files works usually better than TIFF because they compress background and this points from static background doesn't mess with align. Masking is also a solution but for me it's most important to know my photos will align correctly as fast as possible. I get archaeological finds for few hours and I have to know did I do my photos for photogrametry good or not. Especially when I am doing hundreds of photos and several artifacts.

So that would be very useful to have option to change all files in folder with photos from JPGs to TIFFs not one by one files as now in 1.6.2 Metashape.

Anyway thanks very much for help and now I am now much more convinced that my work will give nice 3d models results :)

Bug Reports / Re: JPG aligned Tiff not
« on: March 05, 2020, 03:31:01 PM »
Thanks. For now I can confrim taht with masked background photos are aligned correctly.

Bug Reports / Re: JPG aligned Tiff not
« on: March 04, 2020, 04:36:21 PM »
Align selected cameras option doesn't work for me. After align selected cameras nothing happens. Maybe I am doing something wrong. I will do investigation with masks but that's also time consuming. The best option for now will be just to change files from JPGs to Tiffs orn PNGs.

Bug Reports / Re: JPG aligned Tiff not
« on: March 04, 2020, 03:24:22 PM »
Thanks! So the problem exist... in my tests PNG works better than TIFF but also not so good as JPGs. I have the same project with added photos (166) and they are aligned without problems in JPGs but not in TIFF and PNG.

Do you have any better solution to change photos after aligment to TIFF or PNG. It's very time consuming to change the path of every photo from 166 photos.

Bug Reports / Re: JPG aligned Tiff not
« on: March 02, 2020, 10:33:53 PM »
Ok I will send you PM I didn't get any error message just not aligned photos.

Bug Reports / JPG aligned Tiff not
« on: March 02, 2020, 08:18:51 PM »
I have archaeological object placed on rotating table photographed from different angles. Usually I take photos in raw format (canon 5ds). Usually I do fast checking that everything is ok and align 144 photos, key point 40 000, tie points 9000 all other options off. ALL photos were aligned ok in RAW (I think it's JPG included in RAW). Next I converted raw photos to TIFF and changed white balance. This tiff files didn't align correctly. I tried to convert RAW files to JPG and they aligned correctly even with changed white balance. So I tried to covert RAW files straightforward to TIFF and this TIFF files always can't be aligned. I checked TIFF with LZW compression and without always with the same result - bed align.

I have such problem in 2 projects so far. I need TIFF because I want to have best quality and masks. I did a test with PNG files and they also didn't align. So the result of my short test is that TIFF files are not aligned correctly in Metashape 1.6.1. Maybe because they are to big ?  I am changing only picture format to JPG and align is correct - all photos ! All others parameters are the same.

So conclusion is that JPG files can be aligned TIFF not. I have 64GB of RAM i7 processor and RTX 2070 Super graphic card. I think computer is ready for align 150 photos.

I can align jpg files and next change the path of each file to tiff file but I have to do it one by one It takes a lot of time with 150 photos. I can provide files and project by PM if they are needed.

Bug Reports / Re: Update Orthomozaic doesn't work
« on: February 08, 2020, 02:03:29 AM »
Sorry for late respond. I checked with latest version 1.6.1. Update Orthomozaic works. Thanks

Bug Reports / Update Orthomozaic doesn't work
« on: October 07, 2019, 12:34:31 AM »
Hi I have 1.5.5 version of Metashape Pro and I just noticed that updating orthomozaic doesn't work. I did some assing images on the orthophoto and when I am trying to update changes by right mouse click on the orthomozaic that resets the orthophoto.

General / Workflow for better textures on 3d models
« on: December 28, 2017, 04:38:24 PM »
I am creating 3d models from hundreds of photos taken from different angels and distances. My main problem with this 3d models is that they have texture with difference in sharpness. Same places are sharper same are blurred. I would like to have bigger control over texture generation. I am using standard generation of texture (generic mosaic) because it gives the best quality. I am usually manually selecting photos for texture generating but it's very time consuming. I have to select photos, generate the texture check is it ok usually it's not ok so again select photos, generate the texture......etc.. Do you have any faster workflow for generating crisper texture or for changing photos from which the texture is generated in exact places of 3d models???

Thanks reset view helped :)

I am opening the project next I am choosing "predefined views" and "Back" next

I am rotating a little bit an object around Z axis by holding mouse key on navigation ball next

Build Orthomoziacs and Planar/Current View/Enable color correction/Max dimension 4096 and

if I am doing it for the first time it's working but for the second time orthomosaics is blank

Please look at video:

Bug Reports / Blank orthomosaics when orthomosaics is generated second time
« on: December 14, 2017, 05:18:40 PM »
Hi I have 3d model of trench and I am trying to create orthophotos of one side. Model is georeferenced with GCP from GPS. When I am generating orthomosaic for first time everything is working when I try to do that second time I get blank screen no orthophoto at all. Bug apears in 1.3.4 and 1.4 prerealese photoscan.

If I will close photoscan and open it again generating of orthomosaic working again.

Bug Reports / Re: masking of textures not working?
« on: November 20, 2017, 12:23:17 AM »
I am also waiting for texture masking :)

Pages: [1] 2