Messages

1

General / Micasense Altum-PT data processing

« on: October 05, 2022, 01:26:47 PM »

How does Agisoft handle altum-pt data? There are 3 different resolutions. When you fly 120m multispectral bands have GSD approx. 5,28 cm, panchromatic 2,49 cm and thermal 33,5 cm. When I export orthomosaic all bands have same resolution as multispectral bands. Can I export so that each band have their designated resolution?

2

Bug Reports / Re: qt plugin missing

« on: March 03, 2021, 07:24:26 PM »

Hello rover,

Can you please provide the screenshot or exact text of the error message observed?

Here is a capture from recorded video!

https://i.imgur.com/XW4Ewzh.png

3

Bug Reports / Re: qt plugin missing

« on: March 03, 2021, 07:02:19 PM »

Hello rover,

Can you please provide the screenshot or exact text of the error message observed?

It's pretty hard because that error is there just like one second or so and then disappears.

Can there be a conflict if some other installed software is using those same plugins? Coworker was able to install agisoft on a laptop, but it would be nice to get it working on that desktop pc in question as well.

4

Bug Reports / qt plugin missing

« on: March 01, 2021, 06:56:30 PM »

Coworker has  a problem starting metashape pro 1.7.1 (windows 10 OS). At start it says something about missing plugin and shuts down. Re-installed multiple times without success. What could be the solution to this problem?

5

General / Re: V 1.6.0 - Dense cloud generation time longer, increased noise

« on: January 23, 2020, 03:31:25 PM »

I was wondering the same. I ran 2 test sets, 56 images from P4 rtk. Dense cloud processing time more than doubled when fit additional corrections was on (18  vs 42 min). Just a few moments ago I finished processing a set of 800 images. Dense cloud on high quality took 14 hours. That could be 5-6 hours when not using additional fit.

So Alexey are you saying this will improve in the future?

6

Bug Reports / Re: Dense cloud and CUDA error

« on: May 12, 2019, 03:01:27 PM »

Figured this out: MSI afterburner was the reason for this. Usually I make sure that program is closed during agisoft sessions. But now I noticed there is a button where you can set to load OC values at windows startup. That button was on and I didn't even know that. So I think OC settings were applied in the background even though afterburner was closed.

7

Bug Reports / Dense cloud and CUDA error

« on: May 07, 2019, 11:02:25 PM »

At the moment I can't pass dense cloud phase at all. Everytime I get this cuda error. I have installed/re-installed gpu drivers, uninstalled and installed agisoft etc. Nothing works. Any suggestions?

Code: [Select]

2019-05-07 22:43:33 [GPU] estimating 2817x2673x224 disparity using 1409x1344x8u tiles
2019-05-07 22:43:33 GPU disparity to distance failed: unknown error (30) at line 216
2019-05-07 22:43:33 using CPU implementation...
2019-05-07 22:43:33 Error: Kernel failed: unknown error (30) at line 821
2019-05-07 22:43:33 GPU processing failed, switching to CPU mode
2019-05-07 22:43:33 [CPU] estimating 2817x2673x224 disparity using 939x891x8u tiles
2019-05-07 22:43:48
2019-05-07 22:43:48 Depth reconstruction devices performance:
2019-05-07 22:43:48  - 4% done by CPU
2019-05-07 22:43:48  - 96% done by GeForce GTX 1080
2019-05-07 22:43:48 Total time: 186.562 seconds
2019-05-07 22:43:48
2019-05-07 22:43:48 Warning: cudaStreamDestroy failed: unknown error (30)
2019-05-07 22:43:48 Warning: cudaStreamDestroy failed: unknown error (30)
2019-05-07 22:43:48 Finished processing in 225.257 sec (exit code 0)
2019-05-07 22:43:48 Error: unknown error (30) at line 211

Code: [Select]

2019-05-07 22:38:19 Agisoft Metashape Professional Version: 1.5.2 build 7838 (64 bit)
2019-05-07 22:38:19 Platform: Windows
2019-05-07 22:38:19 CPU: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (desktop)
2019-05-07 22:38:19 CPU family: 6 model: 158 signature: 906EAh
2019-05-07 22:38:19 RAM: 63.9 GB
2019-05-07 22:38:19 OpenGL Vendor: NVIDIA Corporation
2019-05-07 22:38:19 OpenGL Renderer: GeForce GTX 1080/PCIe/SSE2
2019-05-07 22:38:19 OpenGL Version: 4.6.0 NVIDIA 430.53
2019-05-07 22:38:19 Maximum Texture Size: 32768
2019-05-07 22:38:19 Quad Buffered Stereo: not enabled
2019-05-07 22:38:19 ARB_vertex_buffer_object: supported
2019-05-07 22:38:19 ARB_texture_non_power_of_two: supported
2019-05-07 22:38:19 Using simple console. Rich console can be enabled in Preferences dialog.

Latest log fully:
https://pastebin.com/JyCjfWFH

8

General / Re: new agis 1.52

« on: March 29, 2019, 02:08:16 PM »

I updated the driver, still failed.
Re-installed the same driver using clean install method, same thing.
Then i removed and re-installed agisoft and now I got passed that point where the dense cloud crashed. It seems to be working again.

Nvidia driver is now the newest 419.67. No problems with alignment.

9

General / Re: new agis 1.52

« on: March 29, 2019, 12:52:54 PM »

First two attempts on 1.5.2:

2019-03-29 11:44:36 timings: rectify: 0.073 disparity: 1.515 borders: 0.019 filter: 0.036 fill: 0
2019-03-29 11:44:36 [CPU] estimating 1377x896x160 disparity using 1377x896x8u tiles
2019-03-29 11:44:38 timings: rectify: 0.04 disparity: 2.279 borders: 0.03 filter: 0.052 fill: 0
2019-03-29 11:44:38
2019-03-29 11:44:38 Depth reconstruction devices performance:
2019-03-29 11:44:38  - 4%    done by CPU
2019-03-29 11:44:38  - 96%    done by GeForce GTX 1080
2019-03-29 11:44:38 Total time: 59.879 seconds
2019-03-29 11:44:38
2019-03-29 11:44:38 Warning: cudaStreamDestroy failed: unknown error (30)
2019-03-29 11:44:38 Warning: cudaStreamDestroy failed: unknown error (30)
2019-03-29 11:44:41 Finished processing in 476.089 sec (exit code 0)
2019-03-29 11:44:41 Error: unknown error (30) at line 211

10

Bug Reports / Re: GPU not recognized

« on: March 14, 2019, 03:35:07 PM »

We learned that the virtual machine needs different kind of license for GPU in order to enable CUDA. We'll make changes to the server and it should work after that 

11

Bug Reports / Re: GPU not recognized

« on: March 13, 2019, 06:36:10 PM »

Hello rover,

I can suggest to make a clean driver install for the latest NVIDIA drivers downloaded directly from their web-site.

If the problem persist, please check, if GPU-Z or similar utilities are able to detect CUDA and OpenCL for your GPU.

Hi!
Here is gpu-z screenshot. It doesn't detect cuda or openCL at this moment. I'll see what I can do about drivers and post again after that.

https://i.imgur.com/noAZRda.jpg

12

Bug Reports / GPU not recognized

« on: March 13, 2019, 12:16:03 PM »

The problem here is that the GPU tab in preferences is empty. When I start agisoft everything looks ok. It does show the gpu which is Tesla P100. When I go into preferences and open the GPU tab, the error on the last line is written in the log. Since this I have updated Agisoft to 1.5.1 and still the same problem. 

Agisoft PhotoScan Professional Version: 1.4.4 build 6848 (64 bit)
Platform: Windows
CPU: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (server)
CPU family: 6 model: 79 signature: 406F1h
RAM: 96.0 GB
OpenGL Vendor: NVIDIA Corporation
OpenGL Renderer: GRID P100-2B/PCI/SSE2
OpenGL Version: 4.6.0 NVIDIA 412.16
Maximum Texture Size: 32768
Quad Buffered Stereo: not enabled
ARB_vertex_buffer_object: supported
ARB_texture_non_power_of_two: supported
Using simple console. Rich console can be enabled in Preferences dialog.

clGetPlatformIDs failed: CL_UNKNOWN_ERROR_CODE_-1001