Messages

1

Feature Requests / Re: batch process file and automatic shutdown

« on: November 30, 2023, 08:46:56 PM »

Dear Alexey
Please add this favorite function to batch process in Metashape 2.
Actually we need to shutdown after finishing batch process task in Metashape.
Thanks

2

General / Re: Create and use Custom Geoid

« on: October 26, 2019, 07:43:14 AM »

Hello M.B.Bayati,

In combination with what planar coordinate system you are planning to use this geoid?

UTM-Z39N+WGS84

3

General / Re: Create and use Custom Geoid

« on: October 25, 2019, 02:34:56 PM »

Also I tried Ascii grid (*.grd) but Agisoft does not accept.
and many other format I tried!!!

4

General / Re: Create and use Custom Geoid

« on: October 25, 2019, 01:43:43 PM »

Please guide me to create a suitable format for my small area geoid?!
I tried many ways to create in many format with surfer,global mapper and geoid conversation utility(Eye4software company), but I cant make a correct file for Metashape.
Also I tried (Table Lon/lat/alt *.txt ) but I see this bad image in global mapper that has real geoid height just in grid points(green area in image)!!!

5

General / Create and use Custom Geoid

« on: October 23, 2019, 02:22:15 PM »

Hi
How can I create a small area geoid model (*.tif file) with 49 points in a 2km rectangular grid and use in Agisoft Metashape ?
My points are here:
No   Latitude   Longitude   Geoidal Height
1   36.63899109   53.79450119   -5.7751
2   36.63846442   53.81684685   -5.7015
3   36.63793356   53.83919193   -5.7019
4   36.63739852   53.86153642   -5.6593
5   36.63685929   53.88388032   -5.6597
6   36.63631588   53.90622362   -5.541
7   36.63576828   53.92856633   -5.5414
8   36.63521651   53.95090842   -5.3438
9   36.63466055   53.97324991   -5.3442
10   36.62150475   53.77150949   -5.7745
11   36.62098261   53.79385055   -5.7749
12   36.62045627   53.81619102   -5.7013
13   36.61992576   53.83853092   -5.7017
14   36.61939107   53.86087022   -5.6591
15   36.61885219   53.88320894   -5.6594
16   36.61830913   53.90554706   -5.5408
17   36.6177619   53.92788457   -5.5412
18   36.61721048   53.95022149   -5.3436
19   36.61665488   53.97255779   -5.344
20   36.60349586   53.77086461   -5.1003
21   36.60297405   53.79320048   -5.1007
22   36.60244807   53.81553578   -4.9441
23   36.6019179   53.83787049   -4.9444
24   36.60138355   53.86020461   -4.9728
25   36.60084503   53.88253815   -4.9732
26   36.60030233   53.90487109   -4.7826
27   36.59975544   53.92720343   -4.783
28   36.59920439   53.94953516   -4.7984
29   36.59864915   53.97186629   -4.7988
30   36.5854869   53.7702203   -5.1861
31   36.58496544   53.79255099   -5.1004
32   36.58443979   53.81488111   -4.9438
33   36.58390997   53.83721065   -4.9442
34   36.58337597   53.8595396   -4.9726
35   36.5828378   53.88186796   -4.973
36   36.58229545   53.90419572   -4.7824
37   36.58174893   53.92652289   -4.7828
38   36.58119823   53.94884945   -4.7982
39   36.58064336   53.9711754   -4.7985
40   36.56747788   53.76957656   -5.1858
41   36.56695675   53.79190208   -5.1002
42   36.56643145   53.81422703   -4.9436
43   36.56590198   53.83655139   -4.944
44   36.56536833   53.85887517   -4.9724
45   36.56483051   53.88119836   -4.9728
46   36.56428851   53.90352095   -4.7822
47   36.56374234   53.92584295   -4.7825
48   36.56319201   53.94816434   -4.7979
49   36.56263749   53.97048513   -4.7983

6

Feature Requests / Re: Polyline vertex snapping and "Pan" tool for "Ortho view" like AutoCAD

« on: October 19, 2019, 09:31:47 PM »

Thanks for your checking and answering to most of requests.
The best capability for Metashape in mapping is drawing polyline with snapping on vertices.
Please please please add snapping to Metashape!!!

7

Feature Requests / Re: Polyline vertex snapping and "Pan" tool for "Ortho view" like AutoCAD

« on: October 17, 2019, 10:01:23 AM »

Does an agisoft expert answer these questions or suggestions?

Mr. Alexey Pasumansky  ??

8

Feature Requests / Re: GCP assignment_Trimble Inpho vs Agisoft

« on: October 17, 2019, 09:52:33 AM »

Does an agisoft expert answer these questions or suggestions?

Mr. Alexey Pasumansky ??

9

Feature Requests / GCP assignment_Trimble Inpho vs Agisoft

« on: September 08, 2019, 03:52:07 PM »

Please change tme method of marker projection like "Trimble inpho" or "Pix4d Mapper".
Agisoft need, small windows of gcp estimated location and project in own place just with one click like "Trimble Inpho"
Worst of all, you have to double-click on each photo and then introduce the point.

please see this video.
https://yadi.sk/i/eMsd0kNPDdWzHw

10

Feature Requests / Re: Polyline vertex snapping and "Pan" tool for "Ortho view" like AutoCAD

« on: September 06, 2019, 11:34:08 AM »

Please add Line Type and Line weight like autocad for Vector drawing.
Thanks a lot.
The image of LineType capability, has been atached.

11

Feature Requests / Polyline vertex snapping and "Pan" tool for "Ortho view" like AutoCAD

« on: September 01, 2019, 10:23:53 AM »

Hi,
Your software is great and user-friendly in image processing, but it has deficiency in vector drawing in "ortho view" for mapping projects!
Is it possible to upgrade these tools?

Here are a few:
1: I can't do the new polyline drawing from the exact end point(XYZ) of the previous polyline in "Model" or "ortho" view!
Because it can't snap to that vertex like AutoCAD.
Please add "Vertex, Midle,prependicular, near" for polylines and polygones and "Node(Point)" for point shape.
Note: I know about about "i" & "r" in vector vertex editing but is not enough for good draw!

2: Also, please add an "Undo botton" for situations  we have a mistake to draw last or older vertex.

3: Please add a "rectangle shape" to add shape toolbox.

4: In "Model view" we can use "Right and Middle mouse botton" to change screen when we are drawing a vertex or not.
But in "Ortho view", we can only use "Middle mouse botton" to review all of a DEM or Orthomosaic without changing screen zoom.
But when I start draw a vector, I cant use "Middle or right mouse botton" to change sceen view without changin zoom level!


Note: I hope my explanations can tell what I mean.

Please see this video:
https://yadi.sk/i/cxKJZqN7OBOKUA