Forum

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - LRP

Pages: [1] 2
1
Yes, using latest version 2.2.1.

The issue appears to be present upon import.

2
Bug Reports / Laser Scanner Camera Locations Export
« on: May 27, 2025, 04:19:09 PM »
I can export laser scan cameras if I select Metashape XML format, however when I try to export in OPK format, Metashape says there are no aligned cameras. Should it not be able to export the laser scanner cube map cameras in this format?

3
I am creating some orthographic views of laser scans in the "Elevation View" mode. However, the elevation color gradient doesn't span the entire height of the scan data. The maximum height color (red) stops about 1/3 of the way up the model. There is a significant part of the laser scan data that appears to be colored solid red. The maximum height on the elevation graph also doesn't accurately reflect either the actual maximum height of the data nor the point where the maximum height color stops. The actual height of the data should be ~60 feet. But the graph maximum is ~90 feet.

4
I am using Windows version 2.2.0.19890. When I add markers, they are automatically being refined even when I turn off "Refine Markers". This has happened in multiple projects. Can anyone else confirm this behavior? Toggling on and off refine markers seems to work, but behavior appears to be inconsistent.

5
General / Build DEM using lowest points (bottom of grass/vegetation)
« on: October 14, 2024, 05:40:51 PM »
I would like to build a DEM that primarily uses the lowest LiDAR points scanned of a grassy terrain, to get as close to the ground surface as possible. I am using the Planar Bottom XY projection, can anyone confirm if this would be the best approach? Use examples of the different planar projection methods would be helpful.

6
Bug Reports / Re: Export Model - Clip to Boundary Shapes Overlap
« on: September 11, 2024, 06:57:42 PM »
Bump

7
I will upload some case examples, but it is quite easy to re-create, pretty much happens on any meshing using a point cloud with arbitrary surface type.

8
Bug Reports / Export Model - Clip to Boundary Shapes Overlap
« on: August 06, 2024, 03:54:38 PM »
I am exporting a model and enabling clip to boundary shapes. Due to the large scale of the object, I have several overlapping shapes to cover the area of interest. However, the exported object is divided where the shapes overlap. I would expect the overlap area to be additive, but it appears to be subtractive. Is there a way to combine multiple shapes into a single shape or is this indeed unintended functionality?

9
I was really hoping this bug would be fixed in version 2.1.2. But sadly, it is not. Any ETA on the fix for this???

10
Quite frustrating. It seems it should be such a simple fix. The interpolation is causing quite a headache when having to clean up unwanted geometry. I sent a PM to Metashape staff with no response, so I will send again.

11
Any updates?

12
Have you been able to re-create the issue?

13
Yes, same problem. I just tested meshing with depth maps, volumetric masks, and interpolation disabled but still appears to be interpolating.

14
This is becoming a very frustrating problem. Agisoft, please fix the disabled interpolation bug!!!

15
Bug Reports / Meshing Interpolation Disabled produces interpolation
« on: February 20, 2024, 03:24:27 PM »
See screenshot. This has been encountered in numerous projects and by other users.

https://www.agisoft.com/forum/index.php?topic=16247.0


Pages: [1] 2