Messages

1

General / Re: Rotated point clouds w/very large pitch, roll, and yaw errors

« on: October 05, 2024, 10:04:48 PM »

I do the exact same thing with ROVs as well for metrologies. You need to check the box in front of the Yaw to correctly rotate you model.

2

General / Re: Axes Orientation

« on: August 07, 2024, 01:41:52 AM »

It worked beautifully, thank you so much for this. I have been banging my head against the wall for over a week.

3

General / Re: Axes Orientation

« on: August 06, 2024, 10:58:29 PM »

I will try this and report back.

Thank you Alexey.

4

General / Re: Axes Orientation

« on: July 30, 2024, 12:00:34 AM »

Any feedback on this? I have the same situation with my scaled dataset, Z is never up and I have pitch, roll and heading values for each image, I do not have x,y,z.

5

General / Re: Hiding camera groups

« on: April 06, 2023, 09:42:29 PM »

Moving to a new chunk breaks the alignment as noodlez said. I tried that first before coming here.

6

General / Re: Depth inacurate in DEM

« on: February 25, 2023, 09:17:14 AM »

Try negative values. -11.3 instead of 11.3

7

General / Re: Import LAS file as points

« on: October 25, 2022, 07:06:11 AM »

Do both dataset have the same coordinate reference system? Can select the las file and fit to screen?

8

General / Datum Transformation

« on: October 19, 2022, 12:39:09 AM »

Does Metashape support NADCON transformation? Exporting to NAD27 16N USft from Metashape is off by 15m as its using a 3-parameter transformation. How do we utilize the NADCON method in Metashape?
I've put in a ticket but no response. This is quite urgent.

9

General / Re: Agisoft article says make DensePointCloud even if use DepthMaps for Mesh Build.

« on: August 20, 2022, 10:05:49 AM »

There are two ways to create a mesh, either by creating a dense cloud or directly running create a mesh option.

In the older version of Metashape (Photoscan) you could only create a mesh from a dense cloud, the process of creating a dense cloud also created depth maps for mesh creation.
Now in Metashape you can skip creating a dense cloud and create a mesh from depth maps without having to create a dense cloud, the option to reuse depth maps will not be there.

If you choose to first create a dense cloud, depth maps will be saved and when you go to create a mesh you can reuse those depth maps.

10

General / Hiding camera groups

« on: August 04, 2022, 06:57:34 AM »

Is there a way to hide camera groups? I have organized my chunk with multiple camera groups based on runlines and area. I want to view a certain group with another and no others...is that possible?

11

General / Re: Camera recommendations still up-to-date?

« on: July 31, 2022, 08:41:35 PM »

The Canon EOS R is a great bit of kit, I captured this cube with it on a turntable. I used an EF 100mm L lens.
The turntable setup was a Foldio3.
https://skfb.ly/owFZq

12

General / Re: Mesh looks "spaghettified" after exporting out as WGS84 (4326)

« on: July 31, 2022, 05:38:11 AM »

As Paulo stated, you need a grid coordinate system...XYZ/ENH...not LatLongHeight which is what WGS84 is exporting.

13

General / Re: Align problem with Phantom 4 RTK

« on: July 31, 2022, 05:27:39 AM »

Hello soarCC,

To better assist can you post screen shots of your camera calibration in metashape and your alignment settings.

14

General / Re: Avoid filling in holes when creating mesh

« on: July 29, 2022, 06:42:42 AM »

How did you create the mesh, with depth maps or dense cloud?

15

General / Re: How to use depth data in Metashape

« on: November 02, 2021, 01:35:37 AM »

Figured it out folks, thanks for viewing.