Messages

1

General / Getting Artifacts around buildings and other structures in Orthomosaic

« on: June 20, 2022, 04:22:15 PM »

Hi,
I have tried considering these settings while processing orthomosaic.
Build ortho : geographic
Surface : DEM
Refine seamlines = checked
Enable hole filling = Checked
Enable Ghosting Filter = unchecked

Refine Seamlines checked and unchecked doesn't show much changes.
I have also tried Point cloud classification and genarated DEM using only Ground points but there is much X Y shift between the building edgs and problem of lean edges.
I cannot manually draw the patch for each buildings for seamline correction because I have around 10 thousand buildings in my ortho.
I have attached few screenshots of ortho. Kindly suggest some good settings so that we can avoid artifacts. I  have the flight overlap of 75 front and 80 side of each image. And camera resolution is 24MP.

2

General / Getting Artifacts around buildings and other structures in Orthomosaic

« on: June 10, 2022, 01:53:52 PM »

I have tried considering these settings while processing orthomosaic.
Build ortho : geographic
Surface : DEM
Refine seamlines = checked
Enable hole filling = Checked
Enable Ghosting Filter = unchecked

Refine Seamlines checked and unchecked doesn't show much changes.
I have also tried Point cloud classification and genarated DEM using only Ground points but there is much X Y shift between the building edgs and problem of lean edges.
I cannot manually draw the patch for each buildings for seamline correction because I have around 10 thousand buildings in my ortho.
 I have even processed the ortho in Pix4dmapper it gives better results than Agisoft. I have attached few screenshots of ortho of agisoft  and pix4d ortho. kindly suggest some good settings so that we can avoid artifacts. I  have a flight overlap of 75 front and 80 side of each image. And camera resolution is 24MP.

3

General / Re: Problem with Network Paths

« on: June 09, 2022, 12:43:39 PM »

Hi, can you please show me how did you give UNC path, and how did you resolve the issue? I am having the same issue no matter what I try.

4

General / Re: Network processing using multiple AWS instance

« on: June 09, 2022, 11:31:22 AM »

Hi, thank you.
This issue got solved.
The network set up was done.
But whenever I am trying to process data be it local system or AWS, some path error is coming. I cross checked the path I am giving in node, agisoft, and my data.
But still it is saying can't open the path.
And the path it is searching for, is not there in the system.
I am attaching the error showing.
Here my server system name is Thor. In that the path I specified in agisoft, is the path in which I kept my data and agisodt .psx file.
The same path I am giving in Node.
but this issue is coming, you can see that in details box jpg.
I am giving some path, and it is searching for some other path.
I can not get over of this issue.

5

General / Re: Network processing using multiple AWS instance

« on: June 07, 2022, 09:52:06 AM »

Hi, Thank you for replying.
I did check node. It is not able to ping server through the port 5840.
I am sharing server side CMD screenshot and node side CMD screenshot.
But I added port 5840 to all nodes and server from aws instance security group.
What should I do to solve this ? How can I set up the network?

6

General / Network processing using multiple AWS instance

« on: June 06, 2022, 08:37:46 AM »

Hi,
I tried to set up a network using 3 AWS instance (windows).
One instance I was using for server and other two for nodes.
Added server 5840 to all of the instances' from security group.
But I am getting an error while connecting the nodes.
I am attaching the error showing.
I want to know why this error is coming, and what would be the solution for this.

7

General / Perfect settings to process data having fine geometry

« on: June 06, 2022, 08:24:23 AM »

Hi,
I was processing a power plant data having fine geometry. But the output quality was very poor. I set the settings -
dense cloud - high
depth filtering- mild
I am attaching the sample.
I want some suggestion, what settings would be perfect for this kind of data.