Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - lins

Pages: [1]
General / Re: Simple orthophoto of the mesh
« on: October 27, 2017, 05:04:57 PM »
I found it ! Right click on the model screen !

But we can't produce a picture of the model with a joint .jgw file ? To put it in QGIS then.

General / Re: Simple orthophoto of the mesh
« on: October 27, 2017, 04:59:15 PM »

I found the orthographic view but not the Capture View option in the software. I have the 1.3.2 version. Can you show with a screen view, where this option is? It seems that I am blind...

General / Simple orthophoto of the mesh
« on: October 27, 2017, 04:43:05 PM »
Hi everyone,

I just don't see where I can do a simple vertical georeferenced orthophoto, not an orthomosaic, of the mesh. Sometimes, the coloured mesh is enough and better than the orthomosaic but I don't find where to produce pictures of it.

Can you help me ?


General / Re: export texture in PNG with
« on: January 28, 2013, 05:54:34 PM »
I changed the color depth for standard and now it's working. Why I can't support the HDR?

Feature Requests / Roll out an cylindrical or conical model
« on: January 28, 2013, 04:57:03 PM »

Is it possible to add an option for the orthophotos to roll out the texture of a model. I know one software who can do this but it is very complicated to use it.

You can put a marker on the top of the model, then  you give a diameter min and max the same thing with the height and all the texture included in these limits will be rolled out. You can choose if you want the external texture or the internal texture of the model.

I think with the model that I gave, you can understand.


General / Re: export texture in PNG with
« on: January 28, 2013, 03:07:32 PM »
Photoscan team gave me this beta version.

General / export texture in PNG with
« on: January 28, 2013, 12:22:52 PM »

I have a problem when I export model with the texture in PNG, it looks like the photo attached. My version is the The Tiff texture and JPG are good but for Tiff Meshlab can't open it, someone knows an open source viewer that can open a OBJ with Tiff texture?


Bug Reports / Re: fog on orthophoto
« on: January 12, 2013, 04:37:59 PM »
I don't have Iphone 4S or something similare and my monument is on island, so I can't got when I want...

Bug Reports / fog on orthophoto
« on: January 11, 2013, 09:08:29 PM »
I asked because fisheye (less than 14 mm) is the best tool for my photos, here my photos have been taken with a 18 mm. The passage to go in the chamber is 60 cm large for 1 m high, so I don't have enough distance to take good pictures and the fisheye can be a good solution.

I know that MicMac, a french software, works with fisheye, but I don't know how. The french team wrote this paper :,d.d2k

Bug Reports / Re: fog on orthophoto
« on: January 11, 2013, 06:34:06 PM »

Sorry I couldn't download the files this morning. I am downloading one part, the models and few photos, now to the files Monument of Carn- Lins.  I will download the second part later.

I have one question but not for this problem. Photoscan is it working with photos taken by fisheye ?


Bug Reports / Re: fog on orthophoto
« on: January 10, 2013, 07:09:33 PM »
Thanks Alexey and RalfH,

Fo my second set, the pictures are from one set but my subject is like a cave context without light. I used white light, to do my photos, but the lighting isn't steady.
So I disabled 4-5 blurred or bright images and I try Mosaic. You have the result attached, it's better but you can see some parts blurred or in the top center above the entrance the stones are not at the good place.

How can I send you the project file ?

Bug Reports / fog on orthophoto
« on: January 10, 2013, 06:19:39 PM »

I need help, I have fog on my orthophotos of megaliths and I don't know why...
Is it a bad alignement of the photos? Or during my capturing session I have done bad pictures? My orthophotos parameters are wrongs?

I had a precedent model with less photos and that worked as I want (picture top right) but my model wasn't complete. So I have taken more pictures, now I have a complete model but I have this problem.

I have to do a presentation with these orthophotos during this week-end so it's really urgent...

Sorry for the poor quality of my attach document.

Thanks to you

General / Scale on orthophoto
« on: January 04, 2013, 04:17:12 PM »

I have only one question, I'm using photoscan for building archaeology and I need orthophotos of my walls but I have one problem : when I want to put my orthophotos at the same scale to do a plate of my building, I fiddle with the images. Is it possible to add a scale next the model, when it's georeferenced, on the orthophoto with Photoscan ?

Pages: [1]