Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Diego ROn

Pages: 1 [2] 3 4
General / Re: Ultra high resolution problems
« on: September 14, 2013, 07:48:58 PM »
yes, it works fine on high, it toke about 40 min

General / Re: Ultra high resolution problems
« on: September 14, 2013, 05:23:32 PM »
Thank you for answering.... I agree it's strange, I don't have the log since my pc froze, so I had to use the task manager, i set up face count on 200000, arbitrary, ultra high.... Can it be a problem of the graphic card?

General / Re: Ultra high resolution problems
« on: September 14, 2013, 01:04:57 PM »
18 mpx

General / Ultra high resolution problems
« on: September 14, 2013, 10:27:55 AM »
Hello everybody :P, I've got a problem.... on the tips and triks page I've found a table that says that with 32 gb of ram (wich I have) I can process at least 20 images....but my pc stops processing after 8 - 10 (the proces seems to stop on generating mesh 14%), any suggestion? I've got an i7 3930k, pny quadro 4000, 32 gb ram..... should I get more ram?

Thanks Diego.  :D

General / Re: yaw, pitch, roll using a tripod.
« on: May 01, 2013, 12:18:34 PM »
mmmmmm :-\ we've got an old trimble 5700 we could use for that, but since recording yaw pitch and roll does not seem to effect the photo alignment I'm going to give up on this idea :) thanks to everybody!  :D

General / Re: yaw, pitch, roll using a tripod.
« on: May 01, 2013, 10:09:29 AM »
We generally work using a total station to mesure control points and the accurancy seems to be fine enough. We tought that recording yaw pitch and roll we could speed up the allignment process, this seems to be true for airborn photos so we tought to try a ground solution.

General / yaw, pitch, roll using a tripod.
« on: April 30, 2013, 10:20:14 AM »
Hi everybody,

since photoscan uses it, here in the lab, we were trying to figure out how to record yaw, pitch and roll in close range photogrammetry using a tripod. Does any of you ever tried to do something like that?

Since we are on very early stage of this any suggestion would be precious. We are thinking to use a 3axis gps, an accelerometer and a data logger, but it's just something we discussed yesterday having a beer.... :)



Camera Calibration / Re: converting topcon image master photo .cmr
« on: April 03, 2013, 01:04:41 AM »
No answer yet, still waiting, I'll ask the chair of my dept. to call, but I'm becoming pessimistic.....

General / problems merging
« on: April 03, 2013, 01:03:16 AM »
Helo everybody,

something strange it's happening while I'm trying to merge chunks, it seems that merging decreses significatively the quality of the mesh. Am I doing something wrong?

Thanks Diego.

Bug Reports / Re: Generating Mesh - 10% Stuck
« on: March 31, 2013, 07:56:11 PM »

I've got a similar problem, 200 photos chunk (18 mpx)

i7 3860

32 gb ram

pny quadro 4000

It remains stuk on 14% on geometry building arbitrary medium......

any suggestion? should I work the cluod with other software?



General / Re: Can't open file HELP!
« on: March 27, 2013, 12:14:11 AM »
I'm working with

win 7 64 bit SP1

32 gb ram

nvidia pnyquadro4000


photoscan pro 0.9.0

How can I send you the work?

I've also experienced another problem: I was a bit desperate, so I started the work again, but sometimes it crashes when I try to load a folder of photo.


General / Can't open file HELP!
« on: March 26, 2013, 11:08:03 PM »
Hi everybody, after a lot of work, I tried to open the project and Photoscan shows me this message "cant open file", I tried to remake the work but it crushed... I've a close deadline, please, can anybody help me?


Camera Calibration / Re: converting topcon image master photo .cmr
« on: February 28, 2013, 06:02:53 PM »
I'll send more info ASAP.



Feature Requests / Layers
« on: February 20, 2013, 10:04:31 AM »
It would be useful to have the possibility to choose whic chunk you want to see when you click "show alligned chunk".



General / Re: Help for a beginner user
« on: February 19, 2013, 10:35:58 AM »
This is one of the core project of my faculty, I mean defining a quality standard for heritage documentation using low budget system.

You can try two different systems:
-   Setting cross section by coordinates as poly, export vertex coordinates, and compare them.
-   Mesure targets into your model with GPS or total statation and compare the 3D face vertex coordinate with the survey data

In order to make it work you have to project your survey and calculate pixel size.

Good luck!

Pages: 1 [2] 3 4