Messages

1

General / Export 3d mesh with Geocentric coordinate

« on: May 15, 2023, 08:05:52 AM »

Is there any reason why 3d mesh cannot be exported with Geocentric coordinates?
(Geocentric coordinate can't define 3D coordinates?)

2

General / Re: Agisoft Metashape 2.0.0 pre-release

« on: March 03, 2023, 10:32:43 AM »

Oh, the garbled message means "The specified service has been marked for delete.".
It seems that the service will not be deleted unless the console that executed the command is terminated.
Exiting the console solved it.

However, currently double-clicking agisoft-fls.exe or starting it without specifying --host will start the license server on "localhost".

When activating the license on "localhost", I cannot get the license from other machines.

This is tricky.

In Step 2 of the help below, please state that it needs to be started from the console with "--host IPaddress".
https://agisoft.freshdesk.com/support/solutions/articles/31000169229--metashape-2-x-floating-license-activation-procedure

3

General / Re: Agisoft Metashape 2.0.0 pre-release

« on: March 02, 2023, 02:12:27 PM »

Installing a Service with --host shows an error. (the following)

>.\agisoft-fls.exe --host 192.168.1.13 --service install
Error: Can't create service: 謖・ｮ壹＆繧後◆繧ｵ繝ｼ繝薙せ縺ｯ蜑企勁縺ｮ蟇ｾ雎｡縺ｨ縺励※繝槭・繧ｯ縺輔ｌ縺ｦ縺・∪縺吶€

4

General / Re: Agisoft Metashape 2.0.0 pre-release

« on: March 02, 2023, 01:58:08 PM »

hello, Alexey

Can't use "host name" in current Windows version agisoft-fls?

If start with "agisoft-fls.exe --host HOSTNAME", cannot connect even if you specify hostname in the client .lic.
Also, I cannot access the web interface at http://hostname:5842 from other machines

If DHCP is used, the IP address of the server may change and it is useful to be able to use host names.

Also, if I start with no --host specified (localhost), it appears that I cannot specify an IP in the client .lic to get a licence.
This means that I must now always specify the IP with --host.

5

Bug Reports / Re: Version 1.7.3 Build 12473 (Windows) Model import error

« on: May 27, 2021, 10:05:06 AM »

I found the cause. Occurs in an environment where CHITUBOX Basic is installed.
https://www.chitubox.com/en/download/chitubox-free

By default, CHITUBOX generates thumbnail previews of OBJ files etc. in Windows File Explorer. This is causing the crash.

uncheck "Enable thumbnail preview of desktop model" in the CHITUBOX setting, the problem will disappear.

The log of Windows Event Viewer is as follows. Qt5Core is failing

The name of the failing application: metashape.exe、version: 1.0.0.1、timestamp: 0x60ac0ddc
The name of the module that is failing: Qt5Core.dll、version: 5.15.2.0、timestamp 0x609819adException code: 0xc0000409
Fault offset: 0x000000000002497a
The failing application path: C:\Program Files\Agisoft\Metashape Pro\metashape.exe
The failing module path
: C:\Program Files\Agisoft\Metashape Pro\Qt5Core.dll
Report ID: 1e08188d-288b-4746-96de-68a9ee93c75a

6

Bug Reports / Version 1.7.3 Build 12473 (Windows) Model import error

« on: May 26, 2021, 01:36:09 PM »

Starting Metashape with Version 1.7.3 Build 12473 (Windows) and selecting File> Import> Import Model causes Metashape to crash. (Window disappears without error)

-------
Yuji Yamauchi
OakCorp Support

7

General / Unable to import pointcloud in pts format

« on: September 30, 2020, 04:08:35 PM »

Unable to import pointcloud in pts format with metashape 1.6.4. It is point 0 after load.
The same is true for pts exported from metashape.

I tried it with pts distributed below, but it is the same
http://www.smartmm.com/downloads.html

what is the reason?


Best wishes,
-------
Yuji Yamauchi
OakCorp Support

8

General / Re: Importing mission plans into "DJI GS PRO" will only load flight paths

« on: February 14, 2020, 09:45:24 AM »

Hello, Mr.Alexey

Thank you for the information.
It was very helpful.

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

9

General / Importing mission plans into "DJI GS PRO" will only load flight paths

« on: February 12, 2020, 11:35:51 AM »

Importing metashape 1.6.1 mission plans into "DJI GS PRO" will only load flight paths.
Need to set camera action manually?

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

10

General / Re: example of performing electron micrograph photogrammetry with metashape?

« on: January 16, 2020, 07:13:49 AM »

Hello, Alexey

Thank you for the information.

I think that it is possible enough, so I hope that the number of metashape cases will increase.

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

11

General / example of performing electron micrograph photogrammetry with metashape?

« on: January 15, 2020, 08:32:53 AM »

Did anyone know of an example of performing electron micrograph photogrammetry with metashape?

Is it possible?

There is an example in realitycapture.
https://www.youtube.com/watch?v=fsd7ojhuzec

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

12

Python and Java API / Re: Script to import scale bar between markers?

« on: January 09, 2020, 10:34:10 AM »

Hello,  Alexey

Thank you for the details.
Very helpful.

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

13

Python and Java API / Re: Script to import scale bar between markers?

« on: January 07, 2020, 09:43:21 AM »

Is there a description of the rules for the .csv format imported by this script?
Another thread?

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

14

Python and Java API / Re: Script to import scale bar between markers?

« on: January 07, 2020, 06:42:29 AM »

Hello,  Alexey

Thank you for the advice.
Worked well

Best wishes,
-------
Yuji Yamauchi
OakCorp Support

15

Python and Java API / Re: Script to import scale bar between markers?

« on: January 06, 2020, 12:09:52 PM »

How do you use this script? Metashape 1.6 gives the following error:

Code: [Select]

IndentationError: unindent does not match any outer indentation level
2020-01-06 18:07:22 Error: unindent does not match any outer indentation level (D:/PS150_import_scale_bars_from_csv.py, line 59)