Messages

1

General / Re: Sorting out DJI's bad GPS Altitude tagging

« on: January 06, 2017, 10:26:33 PM »

Hi,

I find it easier to just process as is and then apply a height shift and coordinate shift to the exported ortho and dem in GIS software.

Although as a surveyor we normally process with high accuracy photo control.

2

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: January 06, 2017, 10:10:16 PM »

I noticed after installation of latest version processing was slow.  When I checked it had unselected the GPU in the settings.
I'm assuming as the GPU settings look different and there isn't an option to choose the number of cores that agisoft sorts this automatically?

 

3

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 20, 2016, 12:13:20 PM »

I've run CMD as adminstrator and got the following error:

C:\Program Files\Agisoft\PhotoScan Pro>photoscan --activate and correct code
Error requesting activation
Read error from network (-105)No such file or directory (errno: 2)

4

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 19, 2016, 11:45:12 PM »

Hi Alex,

I've checked to confirm no proxy is being used.

I've turned off virus and firewall during activation.

I've tried the command line activation but get "syntax" error.  I'm not familiar with using the command line so might not be doing it correctly but I just entered "photoscan --activate 12345-12345-12345-12345-12345" with my code ofcourse.

5

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 18, 2016, 12:07:29 AM »

Hi,

yes I've pressed the ok button and then get a small window with "unexpected error occurred while activating..."

6

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 17, 2016, 03:07:58 AM »

Thanks for quick reply.

Once the code is entered i get this error:

Error checking out license
No license for product (-1)

7

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 16, 2016, 11:27:19 PM »

Hi Alexey,

I was connected to the internet while trying to activate.  Is there something else that needs to be done?

I did see these error below in a window when opening the program.

Error checking out license
No license for product (-1)
qt.network.ssl: QSslSocket: cannot resolve TLSv1_1_client_method
qt.network.ssl: QSslSocket: cannot resolve TLSv1_2_client_method
qt.network.ssl: QSslSocket: cannot resolve TLSv1_1_server_method
qt.network.ssl: QSslSocket: cannot resolve TLSv1_2_server_method
qt.network.ssl: QSslSocket: cannot resolve SSL_select_next_proto
qt.network.ssl: QSslSocket: cannot resolve SSL_CTX_set_next_proto_select_cb
qt.network.ssl: QSslSocket: cannot resolve SSL_get0_next_proto_negotiated

8

General / Re: Agisoft PhotoScan 1.3.0 pre-release

« on: December 16, 2016, 01:59:04 PM »

I have version 1.2.6 installed and running on my computer (windows) and have been trying to install version 1.3 to test.

I cannot seem to be able to get it to activate.

I get "error checking out license -1" in a separate window when opening.

I've tried uninstalling older version, running the program in administrator etc without any luck.

Any ideas on what to check or try to activate??

9

General / Re: custom projection gives unsupported vertical datum error

« on: July 30, 2016, 12:43:00 AM »

Did you get this to work ok?

10

General / Re: Adding a new geoid model

« on: July 30, 2016, 12:32:57 AM »

I've placed  the ausgeoid09 file into agisoft folder but the coordinate system doesn't appear to refer to it.

I use epsg 28355.  Is there a different epsg I should be using or can I add reference to the ausgeoid within agisoft somehow?

11

General / Re: OpenCL devices gone

« on: January 11, 2016, 03:53:26 AM »

Maybe it was a windows update issue or NVIDIA driver issue but I've fixed the problem by manually uninstalling all the NVIDIA drivers and reinstalling.

The openCL devices now show up within photscan.

12

General / GPU SLI connection

« on: January 11, 2016, 03:48:31 AM »

Hi,

Is the recommendation still to not connect SLI?

I run 2 x NVIDIA 780 Ti GPU cards.

13

General / Re: OpenCL devices gone

« on: January 11, 2016, 03:31:29 AM »

Hi,

yes i'm using it locally.

14

General / OpenCL devices gone

« on: January 11, 2016, 01:01:03 AM »

Hi,

I've just noticed that the opencl devices have gone which is odd as i don't think there have been and gps driver updates and i've checked in system info to ensure the computer still recognises them.

Any ideas what i should do to resolve?

I've tried reinstalling agisoft and checked for gpu driver updates.

15

General / Re: DJI Inspire 1

« on: January 05, 2016, 02:37:50 PM »

Latest inspire firmware records the elevations as absolute heights instead of the relative height changes.